- Posts: 6
- Thank you received: 0
Question
3D printed object can not be released from the bed
10 May 2015 21:36 #20461
by Rexfreund
Heli, Hexakopter,....
WinPC-NC USB, Eigenbau Fräserl mit Mechapro Interface II, Kress FME 1050, Filou.
Zum Zeichen, Fusion 360 ! mit Hobbylizenz. macht Laune
3D-Drucker (Mankati Basis) Dualprint 2x E3D-V6 2x Bondtech Bowdenextruder Simplify3D (SC-Druckkopf)
Replied by Rexfreund on topic 3D printed object can not be released from the bed
Hello,
I do not know a trick . If the print plate is cooled down should come off the printed part easier . But sometimes you also need a knife blade and a lot of caution .
Therefore I print on a glass plate here , the part is almost powerless down once the plate is cold .
"translated by Google"
regards Klaus
I do not know a trick . If the print plate is cooled down should come off the printed part easier . But sometimes you also need a knife blade and a lot of caution .
Therefore I print on a glass plate here , the part is almost powerless down once the plate is cold .
"translated by Google"
regards Klaus
Heli, Hexakopter,....
WinPC-NC USB, Eigenbau Fräserl mit Mechapro Interface II, Kress FME 1050, Filou.
Zum Zeichen, Fusion 360 ! mit Hobbylizenz. macht Laune
3D-Drucker (Mankati Basis) Dualprint 2x E3D-V6 2x Bondtech Bowdenextruder Simplify3D (
Please Log in or Create an account to join the conversation.