file Question How can I fix the bumps on the side?

  • Jurie
  • Jurie's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
13 Nov 2015 21:45 #26969 by Jurie
Hello everyone!

What can I do to fix this problem with all my 3D printed items?

Seems like every time the head starts at the side, it create this bump.

Is there a setting that I can change to fix this?

Even printing the Stepcraft logo shows this signs of bumps.

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
12 Jan 2016 08:19 #29145 by NBLCKNGHT
Replied by NBLCKNGHT on topic How can I fix the bumps on the side?
I have the same problem in all my models

Please Log in or Create an account to join the conversation.

More
12 Jan 2016 15:35 #29159 by MikeRD03
Replied by MikeRD03 on topic How can I fix the bumps on the side?
I guess it has to do with the "path finding strategy" of the slicer. Don't know which slicer u are using, but when setting my KISSSlicer to print from inside to outside all faces are perfectly clean, here. Try some different settings and/or a different slicer.

SC 420/2 | Kress 1050FME-2 | Mach3 | 3D Druck KISSSlicer

Please Log in or Create an account to join the conversation.

More
03 Jan 2017 16:45 #41807 by IcarusYYZ
Replied by IcarusYYZ on topic How can I fix the bumps on the side?
Anyone figure this out yet?

I'm having same problem as original post. Stepcraft Logo and everything else has pimples all over the sides.

Please Log in or Create an account to join the conversation.

  • ThomasDbg
  • ThomasDbg's Avatar
  • Offline
  • Moderator
  • Moderator
  • SC2/600 mit HF Spindel 500W
More
04 Jan 2017 08:42 - 04 Jan 2017 08:43 #41824 by ThomasDbg
Replied by ThomasDbg on topic How can I fix the bumps on the side?
A very good Troubleshooting guide for several different printing problems and how to fix them you´ll find here:

3D prinitng guide

Produktevangelist :-)

Es grüßt mit der Ihm gegebenen Freundlichkeit...

...der Thomas
Last edit: 04 Jan 2017 08:43 by ThomasDbg.

Please Log in or Create an account to join the conversation.

More
04 Jan 2017 19:07 #41877 by DerRoy
Replied by DerRoy on topic How can I fix the bumps on the side?
These so called blobs are typically a problem of wrong settings for the retract and/or too much flow.
Did you measure the diameter of the filament and set the right value into the slicer?

BR
Roy

MfG
Roy

SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2019 STEPCRAFT GmbH & Co. KG