file Question AMB 1050 HEAT

  • Liudas
  • Liudas's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
26 Feb 2020 09:47 #58333 by Liudas
AMB 1050 HEAT was created by Liudas
Hello

I am am a new one here.
Recently purchased D600 with AMB1050.
At the firs run i ran the spindle at 15000rpm with no real tool, and no real work on it for 5-7 minutes.
I noticed that the spindle clamping surface become noticeably hot during that time.
The sound seems to be ok, have no reference to compare with.
There is a light heating plastics smell int he air.
I just wander what will happen when some tool and real load will be applied to it?

Should i be concerned about it and apply for a warranty??

Please Log in or Create an account to join the conversation.

  • MagIO2
  • MagIO2's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Zu viele Ideen und zu wenig Zeit
More
26 Feb 2020 11:43 #58334 by MagIO2
Replied by MagIO2 on topic AMB 1050 HEAT
Did you read the manual? Is there something written about a "run in"? Some spindles require a run in before first usage. That would probably include some procedure to follow ... for example run it for 10 min. @ 5000 rpm, then increase ...

Did you search the web? AMB is not only sold with SC machines. If this is a common problem you should find something already.

Can't help with details, as I don't have this Spindle. But better to hear some more ideas than nothing.

SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch

Gruß, Andreas

Please Log in or Create an account to join the conversation.

  • Liudas
  • Liudas's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
26 Feb 2020 12:30 #58335 by Liudas
Replied by Liudas on topic AMB 1050 HEAT
Nothing is mentioned in the manual about "run-in"
I just wander what level of the temperature is normal for this kind of situation?

Please Log in or Create an account to join the conversation.

  • MagIO2
  • MagIO2's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Zu viele Ideen und zu wenig Zeit
More
26 Feb 2020 14:11 #58336 by MagIO2
Replied by MagIO2 on topic AMB 1050 HEAT
Well ... then hot might be a little bit too unspecific. Hot like glowing hot? Hot like "you can't touch it hot" or hot like you can touch it and keep touching it, but it feels hot? Would be better to have a temperature.

If you can keep touching it, I would not worry too much. Maybe have an eye on it for the first usages, if it get's hotter then it might be an issue. If you can't touch it, it would be better to really have a concrete temperature.

Not sure if it is a good question to ask someone who seems to be unexperienced, but do you also have some bad feeling about the sound it makes?

The reason for too much heat can be a broken ball bearing. Most likely this would also create an "unhealthy" sound.

SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch

Gruß, Andreas

Please Log in or Create an account to join the conversation.

  • Liudas
  • Liudas's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
28 Feb 2020 19:15 #58375 by Liudas
Replied by Liudas on topic AMB 1050 HEAT
Well. Thanks.
Numbers always make more sense.
So temperature rises to 36-48 and stays like that. Tryed for few hours, measures with non contact thermometer. Seams it is not so bad and probbably totaly normal. Too much of a panic...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.