- Posts: 1
- Thank you received: 0
Question
Touch Length Sensor Calibration or Offset
- Krakatoa
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
07 Mar 2023 00:24 #63010
by Krakatoa
Touch Length Sensor Calibration or Offset was created by Krakatoa
Hey,
Using my touch length sensor I end up about .5 mm above my work surface. Is there an offset in the software, or a way to calibrate the sensor?
Thank You
Using my touch length sensor I end up about .5 mm above my work surface. Is there an offset in the software, or a way to calibrate the sensor?
Thank You
Please Log in or Create an account to join the conversation.
- chrime
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 31
- Thank you received: 5
17 Mar 2023 13:14 #63027
by chrime
---
Autodesk Fusion 360 CAD / CAM Operator / Designer
Autodesk Eagle / KiCAD Elektronikentwickler
Stepcraft M.700 (UCCNC)
Replied by chrime on topic Touch Length Sensor Calibration or Offset
You can change the value in the TLS-Macro (M31 ?)
---
Autodesk Fusion 360 CAD / CAM Operator / Designer
Autodesk Eagle / KiCAD Elektronikentwickler
Stepcraft M.700 (UCCNC)
Please Log in or Create an account to join the conversation.