Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Assembly and Maintenance
4
Beiträge
4
Benutzer
0
Likes
5,151
Ansichten
Themenstarter
Hello,
Yesterday I recieved my Stepcraft 840. I have build the whole machine, but i have some problems. I hope someone can help me.
When i want to move the machine with the laptop. The moving process from the Y-axis gets jammed. It's stuck, won't move from left to right.
(sorry for bad englisch, i'm dutch)
Please help me.
Veröffentlicht : 25/10/2015 2:49 pm
Did you check the following topic: here. Does it make any particular sound when it gets stuck?
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 26/10/2015 8:04 pm
I had there same issue with my 420/2 at start, but loosing and tighten the bolds of the frame again while moving the unit was the solution for me. The frame was not 100% levelled, and that caused resistance.
I have now many hours of milling, and the problem never came back.
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Veröffentlicht : 28/10/2015 4:14 pm
I am going to have to do that with my 840/2
On a number of occiaions the X / Y had stalled, but only at the far end of travel (IE whrn doing full sized pieces)
Only today i have wasted a dozen pieces of wood (18mm MDF so not too expensive)
Veröffentlicht : 18/11/2015 5:44 pm
