Question About the anti-backlash official nut

Start
Prev
1
Next
End

jvalencia
Topic Author
Offline
Forum Nutzer

28 Apr 2018 16:29 - 28 Apr 2018 16:30 #53608 by jvalencia

About the anti-backlash official nut was created by jvalencia

Have anyone tried it yet?

I mean this one: https://shop.stepcraft-systems.com/lead-screw-nut-rg10x3mm_1

I'm having backlash on X axis.

Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad

Last edit: 28 Apr 2018 16:30 by jvalencia.

Please Log in or Create an account to join the conversation.

AlanUK
Offline
Forum Nutzer

29 Apr 2018 09:19 - 29 Apr 2018 09:22 #53610 by AlanUK

Replied by AlanUK on topic About the anti-backlash official nut

Hi, I have fitted them all OK and even with no real adjustment they improve the movement as they are slightly longer, but replace the original ones. Even just screwing on the lead screw the slackness is greatly reduced, but to really fit properly the lead screws need to be taken off and each one set up (adjust screw tension) then put back, also as I had the machine dismantled fully removed the grease and now use the white lithium.
To fully replace you need 4 nuts.

SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360

Last edit: 29 Apr 2018 09:22 by AlanUK.

Please Log in or Create an account to join the conversation.

jvalencia
Topic Author
Offline
Forum Nutzer

29 Apr 2018 18:00 - 29 Apr 2018 18:07 #53613 by jvalencia

Replied by jvalencia on topic About the anti-backlash official nut

Thank you Alan, I'll give it a try

[edit]

Damn, shipping costs are high for a single nut. I'll have to invent something

Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad

Last edit: 29 Apr 2018 18:07 by jvalencia.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

choose your language

Question About the anti-backlash official nut