Question Play in Y axis - Ordered replacement nuts

Start
Prev
1
Next
End

eiaro
Topic Author
Offline
Forum Nutzer

12 Nov 2018 12:11 #55036 by eiaro

Play in Y axis - Ordered replacement nuts was created by eiaro

Yesterday I discovered play in my Y axis. Didn't measure the play but it explains why my circuits boards is not milling even close to good.

Ordered new nuts from Sorotech.de, and I choose the upgraded nuts.

Hope this will fix my issue...

StepCraft 2 840 with HF500 spindle controlled by LinuxCNC

Please Log in or Create an account to join the conversation.

eiaro
Topic Author
Offline
Forum Nutzer

22 Nov 2018 02:56 #55211 by eiaro

Replied by eiaro on topic Play in Y axis - Ordered replacement nuts

Aye, worked great.

So good that I ordered nuts for X and Z as well. My Z axis has had much play for a long time.

StepCraft 2 840 with HF500 spindle controlled by LinuxCNC

Please Log in or Create an account to join the conversation.

TommyF
Offline
Forum Nutzer

26 Nov 2018 01:01 #55256 by TommyF

Replied by TommyF on topic Play in Y axis - Ordered replacement nuts

Do you mind link to them

Please Log in or Create an account to join the conversation.

eiaro
Topic Author
Offline
Forum Nutzer

27 Nov 2018 13:14 #55277 by eiaro

Replied by eiaro on topic Play in Y axis - Ordered replacement nuts

Here you go:
https://www.sorotec.de/shop/Lead-Screw-Nut-RG10x3mm--adjustable-.html

StepCraft 2 840 with HF500 spindle controlled by LinuxCNC

Please Log in or Create an account to join the conversation.

TommyF
Offline
Forum Nutzer

03 Dec 2018 21:40 #55326 by TommyF

Replied by TommyF on topic Play in Y axis - Ordered replacement nuts

Nice, thx mann.. my 420 is new, but nice to know anyway...

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

choose your language

Question Play in Y axis - Ordered replacement nuts