- Posts: 2
- Thank you received: 0
Question
lost steps
- Bben
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
22 Feb 2020 20:14 #58293
by Bben
lost steps was created by Bben
Can anyone help me. I'm getting a lot of lost steps that happen on different tool-paths with different tools. I can run the same job and first time runs well next time get lost steps and ruins the piece.
I have moved all power supplies etc away and also aligned all axis and still get them.
Any help gratefully accepted
I have moved all power supplies etc away and also aligned all axis and still get them.
Any help gratefully accepted
Please Log in or Create an account to join the conversation.
- Paranoid128
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 33
- Thank you received: 4
27 Apr 2020 15:36 #58907
by Paranoid128
Replied by Paranoid128 on topic lost steps
What kind of machine do you have? That could be anything. For example software, the speed is too fast or at the machine of the belt.
That could be anything. For example software, the speed is too fast. Or on the machine the belt that is too loose or damaged.
That could be anything. For example software, the speed is too fast. Or on the machine the belt that is too loose or damaged.
Please Log in or Create an account to join the conversation.