- Posts: 2
- Thank you received: 0
Question
CUTTING SILVER BRASS COPPER
- Pianetagame
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
13 Jul 2017 09:02 #48741
by Pianetagame
CUTTING SILVER BRASS COPPER was created by Pianetagame
Before I bought the STEPCRAFT, I wanted to know
if it's possible to "CUT" silver, copper, brass (1,5 mm) with stepcraft 300 and Kress 1050 OR Stepcraft spindle?
Below, a very short video, of what I have to do.
Sorry for my english...
Regards
if it's possible to "CUT" silver, copper, brass (1,5 mm) with stepcraft 300 and Kress 1050 OR Stepcraft spindle?
Below, a very short video, of what I have to do.
Sorry for my english...
Regards
Please Log in or Create an account to join the conversation.
- DocBrown
-
- Offline
- Forum Nutzer
-
13 Jul 2017 09:58 #48742
by DocBrown
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
Replied by DocBrown on topic CUTTING SILVER BRASS COPPER
I have some experience with Aluminum and the quality depends on the type of material.
Here I found an example of someone who used a 2/300 milling brass: Brass
He also sad that MS58 was ok but MS60 type a problem.
However it´s a qustion of the used end-mill and used parameter. Anything other than wood is more complicated (plastic and metal).
Here I found an example of someone who used a 2/300 milling brass: Brass
He also sad that MS58 was ok but MS60 type a problem.
However it´s a qustion of the used end-mill and used parameter. Anything other than wood is more complicated (plastic and metal).
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
The following user(s) said Thank You: Pianetagame
Please Log in or Create an account to join the conversation.
- Pianetagame
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 2
- Thank you received: 0
13 Jul 2017 10:51 #48743
by Pianetagame
Replied by Pianetagame on topic CUTTING SILVER BRASS COPPER
thanks for the tip. Let's see if someone else has done similar jobs.
Please Log in or Create an account to join the conversation.
- Konstantin8976
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 6
- Thank you received: 0
13 May 2022 13:09 #62351
by Konstantin8976
thanks for the video. really helpful
Replied by Konstantin8976 on topic CUTTING SILVER BRASS COPPER
Pianetagame wrote: Before I bought the STEPCRAFT, I wanted to know
if it's possible to "CUT" silver, copper, brass (1,5 mm) with stepcraft 300 and Kress 1050 OR Stepcraft spindle?
Below, a very short video, of what I have to do.
Sorry for my english...
Regards
thanks for the video. really helpful
Please Log in or Create an account to join the conversation.