file Question Zirkulär Fräsen mit V-Carve Pro

  • ThomasMichael
  • ThomasMichael's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
30 Apr 2020 07:52 #58934 by ThomasMichael
Zirkulär Fräsen mit V-Carve Pro was created by ThomasMichael
Moin Gemeinde,

ich arbeite mit V-Carve Pro und möchte mit einem Ø6mm Fräser Bohrungen/Taschen (z.B. Ø35mm) zirkulär ausfräsen, ohne dass er "absetzt" und neu eintaucht.
Derzeit gebe (muss) ich dem Fräser die Anzahl der Durchgänge vor.

Muss aber doch auch in einem Durchgang gehen, dass er z.B. 20mm tief in mehreren Stufen zirkulär ausfräst

Dank für Eure Unterstützung
'
Gruß Tom

Please Log in or Create an account to join the conversation.

More
30 Apr 2020 09:09 #58935 by andileibi

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • ThomasMichael
  • ThomasMichael's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
30 Apr 2020 15:05 #58936 by ThomasMichael
Replied by ThomasMichael on topic Zirkulär Fräsen mit V-Carve Pro
Danke für deine Antwort.

Ich meine so wie hier im Video, ab Minute 2:00



Gruß Tom

Please Log in or Create an account to join the conversation.

More
30 Apr 2020 16:10 #58937 by alpenkreuzer
Replied by alpenkreuzer on topic Zirkulär Fräsen mit V-Carve Pro
Moin Tom,

1. Ob und wie das mit V-Carve-Pro geht - keine Ahnung

2. Mit EstlCam (CAM-Teil) ist das problemlos möglich: Unter "Frässtrategie" im Pull-Up-Menü "schälen" auswählen. Durch Wahl des entsprechenden Post-Prozessors wird eine zu Deinem Steuerprogramm passende Fräsdatei erstellt.

Gruss Michael

begonnen mit 420/2, Alu-Fräse "KARLA" (noch im Bau)
EstlCam mit Arduino NANO, WinPC-NC USB
Kress, QCAD, Fusion 360, Inventor, Winghelper

Please Log in or Create an account to join the conversation.

More
30 Apr 2020 19:54 #58939 by andileibi

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • ThomasMichael
  • ThomasMichael's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
01 May 2020 09:07 #58941 by ThomasMichael
Replied by ThomasMichael on topic Zirkulär Fräsen mit V-Carve Pro
Guten Morgen,

das (Taschen) Endergebnis meine ich, bekomme ich auch hin, ABER:
bei eingestellten mehreren Durchgängen fährt der Fräser nach jedem Gang 5 mm über das Werkstück und taucht für jeden Gang immer wieder neu ein.
Ich möchte aber die Einstellung, dass sozusagen übergangslos der nächste Durchgang gefräst wird, so wie ab Minute 2:00 in dem Video:


Gruß Tom

Please Log in or Create an account to join the conversation.

  • ThomasMichael
  • ThomasMichael's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
01 May 2020 09:09 #58942 by ThomasMichael
Replied by ThomasMichael on topic Zirkulär Fräsen mit V-Carve Pro
Guten Morgen,

das (Taschen) Endergebnis meine ich, bekomme ich auch hin, ABER:
bei eingestellten mehreren Durchgängen fährt der Fräser nach jedem Gang 5 mm über das Werkstück und taucht für jeden Gang immer wieder neu ein.
Ich möchte aber die Einstellung, dass sozusagen übergangslos der nächste Durchgang gefräst wird, so wie ab Minute 2:00 in dem Video:


Gruß Tom

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.