file Question Laser setzt aus

  • yonkoyo
  • yonkoyo's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
07 Aug 2017 09:53 #49420 by yonkoyo
Laser setzt aus was created by yonkoyo
Hallo Miteinander!

Wenn ich etwas mit dem Laser gravieren möchte setzt dieser manchmal an irgendeiner Stelle aus, lasse ich das Programm dann nochmal fahren lasert er an der Stelle so wie er soll. Ist also nicht an einer bestimmten Stelle noch ist der "Aussetzer" reproduzierbar.

Hat jamand einen Tipp für mich, woran das legen könnte?

Mit freundlichen Grüßen
Christian

Please Log in or Create an account to join the conversation.

More
07 Aug 2017 11:49 #49425 by bvs
Replied by bvs on topic Laser setzt aus
Hallo Christian
Spontan würde ich einen Wackelkontakt vermuten.

Da würde ich während einer Testlaserung nach einander an den Kabeln schütteln.

Mehr fällt mir auch nicht ein.

Gruss
Bruno

Please Log in or Create an account to join the conversation.

  • yonkoyo
  • yonkoyo's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
01 Sep 2017 10:38 #49995 by yonkoyo
Replied by yonkoyo on topic Laser setzt aus
Hallo Miteinander!

Nach längerer Zeit kann ich mich wieder etwas mehr mit meiner SC beschäftigen. Das Problem mit dem aussetzen des Laser besteht nach wie vor. Ein Kumpel der einen Plotter besitzt meinte ich solle mal meinen Com Anschluss im Gerätemanager anschauen und nach den verschiedenen Parametern.

Da ich aber nicht weis welche Einstellungen nun die richtigen sind, hier meine Frage/Bitte...

Kann jemand von euch screenshots machen von seinen Einstellungen? Speziell von den COM Anschluss.

Mit freundlichen Grüßen
Christian

Please Log in or Create an account to join the conversation.

More
01 Sep 2017 13:33 #49996 by Fliegenfisch
Replied by Fliegenfisch on topic Laser setzt aus
Hi

mit was steuerst Du ? UCCNC oder NCPC ?

Peter

Mach4, CAMBAM,ESTLCAM 9 + 10, Stepcraft 2/420 mit Kress 1050 Absaugung, Stepcraft Umhausung, UCCNC, Fräswanne, HF 500 Spindel, Gravierspitze, Switchbox, WZ-Längentaster, VCarve 9, Laser 445 von Stepcraft, Handrad UCR201, Performace Kit

Please Log in or Create an account to join the conversation.

  • yonkoyo
  • yonkoyo's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
01 Sep 2017 16:37 #49997 by yonkoyo
Replied by yonkoyo on topic Laser setzt aus
Mit winpc Nc

Mfg

Please Log in or Create an account to join the conversation.

More
02 Sep 2017 12:50 #50012 by Fliegenfisch
Replied by Fliegenfisch on topic Laser setzt aus
Da kann ich Dir leider nicht helfen.
Ich hab UCCNC :-)
Gruß
Peter

Mach4, CAMBAM,ESTLCAM 9 + 10, Stepcraft 2/420 mit Kress 1050 Absaugung, Stepcraft Umhausung, UCCNC, Fräswanne, HF 500 Spindel, Gravierspitze, Switchbox, WZ-Längentaster, VCarve 9, Laser 445 von Stepcraft, Handrad UCR201, Performace Kit

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.