Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
3
Beiträge
2
Benutzer
0
Likes
4,855
Ansichten
Themenstarter
My ball screw on z Axis may be slightly bent i noticed the ballrace that fits on the tool holder was moving slightly within it, ballrace looks fine. see video.
2nd tested the base and its slightly out after bad engraving test.
Veröffentlicht : 12/12/2015 2:29 am
I would take the ball screw out, rotate it on a smooth surface to see if it is bent and replace if needed.
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 13/12/2015 11:09 am
Themenstarter
I think its definitely bent as the bearing in the tool holder wobbles about when moving the z axis.
Just wondering the best way to take out and replace the screw without removing all the gantry and wiring.
Veröffentlicht : 14/12/2015 12:55 pm
