Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
7
Beiträge
4
Benutzer
0
Likes
4,695
Ansichten
Themenstarter
Hello,
Couple months ago I assembled the SC 840 and I'm now trying to fix the problems I have.
I do have WinPC-NC Starter but when I use this to go to home position, some axis goes in to wrong direction. How can I change the direction somehow? Changing wiring or changing a parameter somewhere? Or isn't possible with the WinPC-NC Starter?
So if I need to upgrade, what I have to buy then? I would like to buy 3D milling software as well.
Please, who can help me?
Thanks.
Veröffentlicht : 20/02/2016 7:05 pm
Hi riestepap,
changing a parameter works, i have winpcnc in german, see the picture.
The marked value is it, that you have to change.
After thet works...
For 3D you can by the full verson of winpcnc.
Then you can start out of the box with doing 3D, because your steppi is ready for doing 3d.
Sure, you must using some cad- and cam-software to create the 3d and send it to your steppi.
SC 840, WinPC-Vollversion, HF500
Grüße von der Wasserkuppe.
Veröffentlicht : 21/02/2016 10:32 am
Riestepap is talking about the Starter version. You don't have this settings tab in the starter.
Something went wrong with the installation of WinPC.
SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
Veröffentlicht : 21/02/2016 2:59 pm
@MagIO2
Im so sorry.
@riestepap
You can reach the 'Demomode' by disconecting the usb to steppi connection (plug out the usbcable).
In 'Demomode', winpcnc is working like full version and yes, all savings are done (if you pushed savebuttons).
After that is done, restart winpcnc with steppi connected.
SC 840, WinPC-Vollversion, HF500
Grüße von der Wasserkuppe.
Veröffentlicht : 21/02/2016 8:22 pm
Themenstarter
Hello Nonaga, Hello everyone,
Thanks for helping so far, I've tried couple of times to switch the machine parameter for the X axis in demomode and saved it, it doesn't matter when I start the program again. Everything is working except the X axis.
What to do next?
Veröffentlicht : 23/02/2016 11:05 pm
If you are going to have to upgrade anyway to work in 3D, then give serious consideration to UCCNC. Not only does it work very well, but is is easily configurable and relieves your PC/laptop of all the high speed calcs needed to follow a complex toolpath.
Just my two pennyworth - it works faultlessly for me and integrates seamlessly with Vectric Cut2D and 3D.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Veröffentlicht : 23/02/2016 11:50 pm
Themenstarter
Hello, I'm back after a big summer stop.
I'm still looking for a solution for this problem without upgrading the program. I would like to try first if possible.
Is it possible to change the wire on the card, which is not recommended maybe but I just want to know which color I have to change then.
Anything else maybe?
Veröffentlicht : 07/10/2016 10:47 pm
