- Posts: 1
- Thank you received: 0
Question
Milling problem
- Jolan
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
08 Nov 2021 19:22 #61585
by Jolan
This message has an attachment image.
Milling problem was created by Jolan
Hi all,
I am new on this forum. I am using a D600 with a performance kit for 1 year.
For a few week, I have a problem with the milling. If I want a simple oval for example, the result is different.
Indeed, the milling is not homogeneous, sometimes 1,2 mm wide and sometimes 1,8 mm (see picture attached) like an axis doesn’t work correctly. But after controling everything today, the result is still the same.
Did you have a similar problem ?
Many thanks
I am new on this forum. I am using a D600 with a performance kit for 1 year.
For a few week, I have a problem with the milling. If I want a simple oval for example, the result is different.
Indeed, the milling is not homogeneous, sometimes 1,2 mm wide and sometimes 1,8 mm (see picture attached) like an axis doesn’t work correctly. But after controling everything today, the result is still the same.
Did you have a similar problem ?
Many thanks
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.