file Question Butterfly brooch

  • Trying
  • Trying's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
06 Apr 2021 18:03 #60879 by Trying
Butterfly brooch was created by Trying
Hi chaps, the photo below is my latest work. A five hour mill, used a 1 mm two flute uncut bit pass 0.03mm feed rate 2 mm/sec plunge .5mm/sec 12000 rpm. Plus 3mm 90degree v bit pass 0.1 feed, 5.0mm/sec, plunge 2.5mm/sec 12000rpm. designed and drawn on the Vectric after seeing a photo online. It's around 40mm in width.

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
10 May 2021 11:25 #61111 by Giles
Replied by Giles on topic Butterfly brooch
Very nice - the Stepcraft is very capable in this way...... I use the cheap D cutters myself, but the result is the same (brass and nickel silver)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.