file Question Estlcamm 10

  • Hardy39
  • Hardy39's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
21 Jan 2018 20:49 #52278 by Hardy39
Estlcamm 10 was created by Hardy39
Hallo Leute habe meine Stepi zum laufen gebracht und seit gestern fleisig den Eifelturm gefräst.Nach anfangsschwirigkeiten mit der Referenzfahrt habe ich die Steuerkarte an Stepcraft zurück geschickt und am Freitag kam sie zuruck und alles lief.Jetzt habe ich ein Problem mit Estlcam wenn ich eine Fräsbahn aussen oder innen anklicke macht er mir eine ganz dicke lienie ich weis nicht was los ist wer kann mir helfen.

mfg Harald

Stepcraft 840/2, UCCNC, EslCam, QCAD, Kress

Please Log in or Create an account to join the conversation.

More
21 Jan 2018 23:02 #52280 by Leo12305
Replied by Leo12305 on topic Estlcamm 10
Fraser auswählen

LG
Leo

Eigenbau mit WZL-Probe u.USB Microscrope Camera, Kress FME 1050, Debian wheesy, linuxcnc 2.7, Estlcam V7,V8,V9,V10, Freecad

Wer Rechtschreibfehler findet darf sie behalten!

Please Log in or Create an account to join the conversation.

  • Hardy39
  • Hardy39's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
21 Jan 2018 23:44 #52281 by Hardy39
Replied by Hardy39 on topic Estlcamm 10
Hallo Leo Fräser ist ausgewählt das Problem ist seit ich eine Tasche gemacht habe. Danke für die schnelle Antwort

Gruß Harald

Stepcraft 840/2, UCCNC, EslCam, QCAD, Kress

Please Log in or Create an account to join the conversation.

  • Hardy39
  • Hardy39's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
22 Jan 2018 09:37 #52285 by Hardy39
Replied by Hardy39 on topic Estlcamm 10
Hallo hat sich erledigt habe beim abspeichern etwas falsch gemacht habe mir die DXF neu runter gezogen dann gings lag also nicht am Estlcamm.

LG Harald

Stepcraft 840/2, UCCNC, EslCam, QCAD, Kress

Please Log in or Create an account to join the conversation.

  • FrankTi
  • FrankTi's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Inkscape, VCarve Desktop, UCCNC
More
22 Jan 2018 11:53 #52287 by FrankTi
Replied by FrankTi on topic Estlcamm 10
Hallo Hardy ,

du kannst aber, falls es wieder mal vorkommt, dass du eine Fräsbahn konfiguriert hast und etwas ändern möchtest, diese gewünschte Bahn mit dem AUSWÄHLEN Werkzeug einfach markieren und entsprechend deinen Wünschen umgestalten oder ganz löschen, um sie neu anzulegen.

Grüße Frank

Please Log in or Create an account to join the conversation.

  • Andy103er
  • Andy103er's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Bitte keine PN's...
More
21 Mar 2018 12:46 - 21 Mar 2018 12:48 #53326 by Andy103er
Replied by Andy103er on topic Estlcamm 10
Hi,
wenn ich in Estlcam 10 eine Schrift generiern will (Gravierbutton) stürzt Estlcam ab, sobald ich den Button drücke. Ist das ein Bug?

...die Arbeit steckt im Detail.
SC 420/2, HF500, Absaugadapter, Win-PCNC (USB), Estlcam, Fusion 360, [FreeCAD], [PhotoVCarve]

-PS bitte immer Feedback bei gelösten Fragen/Problemen, in den Beiträgen posten. -das hilft uns allen-
Last edit: 21 Mar 2018 12:48 by Andy103er.

Please Log in or Create an account to join the conversation.

More
26 Mar 2018 13:49 #53386 by DerRoy
Replied by DerRoy on topic Estlcamm 10
Also ich kenne diesen BUG nicht, aber welche 10er Version nutzt Du denn?
Ich glaube die letzte 10er war die 10.047. Falls Deine älter ist, würde ich unbedingt die letzte Version downloaden.

MfG
Roy

SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;
The following user(s) said Thank You: Andy103er

Please Log in or Create an account to join the conversation.

  • Andy103er
  • Andy103er's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Bitte keine PN's...
More
05 Apr 2018 12:32 #53421 by Andy103er
Replied by Andy103er on topic Estlcamm 10
Danke. Mit dem Update ist der Fehler jetzt weg.

...die Arbeit steckt im Detail.
SC 420/2, HF500, Absaugadapter, Win-PCNC (USB), Estlcam, Fusion 360, [FreeCAD], [PhotoVCarve]

-PS bitte immer Feedback bei gelösten Fragen/Problemen, in den Beiträgen posten. -das hilft uns allen-

Please Log in or Create an account to join the conversation.

  • Andy103er
  • Andy103er's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Bitte keine PN's...
More
20 May 2018 23:10 #53788 by Andy103er
Replied by Andy103er on topic Estlcamm 10
Hallo, wenn man in Estlcam ein 3D Objekt fräst und es umspannt: der Nullpunkt liegt immer in der Mitte vom Maß des Rohteiles oder?

...die Arbeit steckt im Detail.
SC 420/2, HF500, Absaugadapter, Win-PCNC (USB), Estlcam, Fusion 360, [FreeCAD], [PhotoVCarve]

-PS bitte immer Feedback bei gelösten Fragen/Problemen, in den Beiträgen posten. -das hilft uns allen-

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.