question-circle Question nc zu stl

More
22 May 2019 10:41 - 22 May 2019 10:42 #56682 by bvs
nc zu stl was created by bvs
Hallo Steppis
Gibt es eine Möglichkeit, aus dem nc Programm ein stl zu machen, das dann der ursprünglichen Vorlage möglichst ähnlich ist...
Grüsse
Bruno
Last edit: 22 May 2019 10:42 by bvs.

Please Log in or Create an account to join the conversation.

More
22 May 2019 11:07 #56687 by Reiner St.
Replied by Reiner St. on topic nc zu stl
Hallo Bruno,
kannst Du nicht das .nc Programm in der passenden Software öffnen und dann als .stl Datei evtl. exportieren !?

Gruß Reiner

Fräse: SC 2/420, T-Nut, AMB 1050 FME-P, 4-Achse, Fräswanne,WZLS, WinPC-NC, Handrad, Estlcam, Filou NC16basic, NC20expert, Aspire 9.5, DeskProto 7 Multi Axis
Laser: Makeblock XY-Plotter 20W, mLaser 2,5W Laser Neje 7/20W
3D Druck: Anycubic Photon S, i3 Mega S,Chiron,TENLOG TL-3D PRO, Zonestar...

Please Log in or Create an account to join the conversation.

More
22 May 2019 11:24 #56690 by bvs
Replied by bvs on topic nc zu stl
Hallo Reiner
Das nc Programm wäre ja dann das Ahornblatt nc von dir...
Das du mir in Aussicht gestellt hast.

Ich meinte, dass es mal irgendwo möglich war, hab aber vergessen wo.

Please Log in or Create an account to join the conversation.

More
22 May 2019 11:26 #56691 by Reiner St.
Replied by Reiner St. on topic nc zu stl
Hallo Bruno,
ja das hatte ich mir schon gedacht, hab aber gerade beim rum google´n auch nichts gefunden !!

Gruß Reiner

Fräse: SC 2/420, T-Nut, AMB 1050 FME-P, 4-Achse, Fräswanne,WZLS, WinPC-NC, Handrad, Estlcam, Filou NC16basic, NC20expert, Aspire 9.5, DeskProto 7 Multi Axis
Laser: Makeblock XY-Plotter 20W, mLaser 2,5W Laser Neje 7/20W
3D Druck: Anycubic Photon S, i3 Mega S,Chiron,TENLOG TL-3D PRO, Zonestar...

Please Log in or Create an account to join the conversation.

More
22 May 2019 11:44 - 22 May 2019 11:46 #56693 by alpenkreuzer
Replied by alpenkreuzer on topic nc zu stl
Moin,
ich fürchte, da wird nichts draus (lasse mich aber sehr gern eines besseren belehren).

Man kann die *.nc-datei sicher in verschiedene andere Programme einlesen; aber aus 2D wird nun einmal ohne weiteres Zutun kein 3D - es fehlt die dritte Dimension. Aber wenn es das doch gibt: wäre toll -. könnte ich gut gebrauchen.

PS: Aber "irgendwie" ist die dritte Dimension doch durch die Z-Zustellung vorhanden - nur nicht ausreichend ...

Gruss Michael

begonnen mit 420/2, Alu-Fräse "KARLA" (noch im Bau)
EstlCam mit Arduino NANO, WinPC-NC USB
Kress, QCAD, Fusion 360, Inventor, Winghelper
Last edit: 22 May 2019 11:46 by alpenkreuzer.

Please Log in or Create an account to join the conversation.

More
22 May 2019 11:58 #56695 by Reiner St.
Replied by Reiner St. on topic nc zu stl
Moin Michael,
ja leider hast Du recht, habe gerade mal das .cnc Programm in FreeCad geladen dort kann ich es auch sehen, aber halt nur die Bahnen die die Fräse abfährt.
Leider läßt sich das aber nicht als .stl Datei exportieren !!

Denke mal Du hast recht, da wirds nichts geben !!!

Gruß Reiner

Fräse: SC 2/420, T-Nut, AMB 1050 FME-P, 4-Achse, Fräswanne,WZLS, WinPC-NC, Handrad, Estlcam, Filou NC16basic, NC20expert, Aspire 9.5, DeskProto 7 Multi Axis
Laser: Makeblock XY-Plotter 20W, mLaser 2,5W Laser Neje 7/20W
3D Druck: Anycubic Photon S, i3 Mega S,Chiron,TENLOG TL-3D PRO, Zonestar...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.