- Posts: 1
- Thank you received: 0
Question
Problem with VCarve and WinPc-NC USB
- mimi
-
- Offline
- Forum Nutzer
-
Less
More
06 Mar 2020 17:17 #58438
by mimi
Replied by mimi on topic Problem with VCarve and WinPc-NC USB
good afternoon,
I experience the same issues as listed above. The machine just dives into the machinebed.
What is the solution for this?
I used the winpcnc atc arc mm function to save the toolpaths and winpcnc is set on HPGL.
Can someone help me please
greetings from The hague (NL)
I experience the same issues as listed above. The machine just dives into the machinebed.
What is the solution for this?
I used the winpcnc atc arc mm function to save the toolpaths and winpcnc is set on HPGL.
Can someone help me please
greetings from The hague (NL)
Please Log in or Create an account to join the conversation.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 224
- Thank you received: 81
10 Mar 2020 09:22 - 10 Mar 2020 09:23 #58460
by CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
This message has an attachment image.
Replied by CNCMiller on topic Problem with VCarve and WinPc-NC USB
Hello All,
Did you checked in WIN-PC NC the attached file setting in Dutch "Beweegrichting omkeren" to switch the movement direction of the Z-axis.
Because the G-code needs this otherwise Z-negative is upwards instead of downwards.
check and have fun.
Did you checked in WIN-PC NC the attached file setting in Dutch "Beweegrichting omkeren" to switch the movement direction of the Z-axis.
Because the G-code needs this otherwise Z-negative is upwards instead of downwards.
check and have fun.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
This message has an attachment image.
Please log in or register to see it.
Last edit: 10 Mar 2020 09:23 by CNCMiller.
Please Log in or Create an account to join the conversation.