file Question CAD, CAM & CNC Workbook - Problem mit GCode

  • Lars_cnc
  • Lars_cnc's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
02 Nov 2019 13:58 #57591 by Lars_cnc
Guten Tag, ich habe mir das Stepcraft CAD, CAM & CNC Workbook gekauft und bin sehr zufrieden damit. An einer Stelle komme ich jedoch nicht weiter.

Ich habe das Modell erstellt und wollte nun die ersten Bohrungen mittels Postprozessor als GCode ausgeben. Die Simulation sieht gut aus, aber in der Log Datei kommt folgendes:

Warnung: Work offset has not been specified. Using G54 as WCS.

###############################################################################
Fehler: Length offset out of range.
Error at line: 742
Error in operation: 'Bohren1'
Failed while processing onSection() for record 324.
###############################################################################

Fehler: Failed to invoke function 'onSection'.
Fehler: Failed to invoke 'onSection' in the post configuration.
Fehler: Failed to execute configuration.
Stop time: Saturday, November 2, 2019 12:39:52 PM
Post processing failed.


Offenbar ist irgendwas mit dem Koordinatensystem des Setups oder den Einstellungen der Bohrung nicht korrekt. Daher wollte ich kurz mit jemandem abgleichen, wo der Fehler liegt.
Hier ein Bild mit den Setup Einstellungen und den Bohreinstellungen. Ich habe schon einiges hin und her probiert, aber noch nicht die richtige Lösung gefunden.



Lieben Gruß
Lars

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Lars_cnc
  • Lars_cnc's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
06 Nov 2019 21:13 #57618 by Lars_cnc
Replied by Lars_cnc on topic CAD, CAM & CNC Workbook - Problem mit GCode
Ich habe grade festgestellt, dass der Screenshot hier im Forum viel zu klein ist. Daher hier nochmal in besserer Auflösung.


imgur.com/a/ZODnB8t

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.