file Question Stepcraft Fräse in Südhessen Darmstadt - Dieburg

  • Heiko-L
  • Heiko-L's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
16 May 2016 22:54 #34197 by Heiko-L
Hi!
Ich suche Kontakt zu Leuten mit Stepcraft - Fräse in Südhessen in der Region Darmstadt - Dieburg zwecks Informationsaustausch.

Ich freue mich auf eure Antworten.

Gruß
Heiko-L

Gruß
Heiko-L
_____________
Hardware: Mechaplus-Fräse,
Software: QCAD, INKSCAPE, ESTLCAM, LINUX CNC

Please Log in or Create an account to join the conversation.

More
17 May 2016 05:08 #34200 by paulkarl
Hallo, komme aus LK Aschaffenburg. Was willst du denn wissen ?

bis Bald, Paul

Please Log in or Create an account to join the conversation.

More
17 May 2016 07:20 #34201 by bvs
Guten Morgen Heiko
Informationen kann man auch austauschen, wenn man nicht in Hessen wohnt.

Und:
Ich war in Hessen in Schulung zum programmieren von achtachsigen Industrierobotern.
Reicht das auch :cheer:

Please Log in or Create an account to join the conversation.

  • Heiko-L
  • Heiko-L's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
17 May 2016 08:45 #34202 by Heiko-L
Hi!
Erst mal vielen Dank für die Antworten.
Ich würde mir gerne mal eine Fräse live ansehen - Aufbau, Funktion, Umgang mit der Software, das geht verständlicher, wenn man sich gegenüber steht, denke ich.

Der Haupteinsatzort meiner geplanten Fräse wäre der Flugmodellbau.

Um die ganze Mimik mal live zu sehen und zu hören, möchte ich nicht quer durch die Republik fahren (müssen).
Je näher, desto besser, aber Aschaffenburg klingt schon interessant.

@Paulkarl - welche Fräse mit welcher Software benutzt du? Wofür verwendest du sie?

Gruß
Heiko-L

Gruß
Heiko-L
_____________
Hardware: Mechaplus-Fräse,
Software: QCAD, INKSCAPE, ESTLCAM, LINUX CNC

Please Log in or Create an account to join the conversation.

More
17 May 2016 19:42 - 17 May 2016 19:46 #34219 by paulkarl
Hy, Heiko
du willst dir also so ein Ding erst anschaffen. Gut so.
Also ich habe noch eine 420er der ersten Generation.
Als Schifflebauer benutze ich die Fräse für Spanten und Aufbauteile.
Hardwaremäßig betreibe ich die Steppi mit einem Uralt-Laptop, Kress 800, Vakuumtisch.
Als Software benutze ich WINPC-USB, BoCNC, und gelegentlich (Hilfe, jetzt werd ich gesteinigt) Estlcam.

PS. Solltest du Interesse haben solltest du schon 50 km einplanen

bis Bald, Paul
Last edit: 17 May 2016 19:46 by paulkarl.
The following user(s) said Thank You: Heiko-L

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
17 May 2016 22:37 #34225 by Elektron
Hallo Heiko!
Komme ebenfalls aus der Nähe von Darmstadt.
Bin immer am Meinungs- und Erfahrungsaustausch interessiert.
Alles weitere können wir ja per PN oder später per Mail besprechen.

Gruß
Andreas

Please Log in or Create an account to join the conversation.

More
14 Jun 2016 14:51 #34975 by Ruebennase
Komme ebenfalls aus dem LK Aschaffenburg, kannst gern mal vorbeikommen



Uwe

Please Log in or Create an account to join the conversation.

More
15 Jun 2016 11:34 #34991 by Andys1957
Hallo Heiko,

ich habe eine 2/600 und wohne ca. 12km südöstlich von DA. Du kannst gerne mal vorbeikommen.

Gruß
Andy

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
16 Jun 2016 23:00 #35032 by Elektron
Hallo!
Es wird Zeit das man sich mal trifft.
Wäre an einem Erfahrungsaustausch interessiert.
Gruß
Andreas

Gruß
Andreas

Please Log in or Create an account to join the conversation.

More
17 Jun 2016 00:09 #35034 by Andys1957
Hallo zusammen,

jepp, auch meinerseits besteht Interesse an einem Erfahrungsaustausch.

Gruß
Andy

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
20 Jun 2016 19:58 #35155 by Elektron
Ok, wann und wo?
Zentraler Treffpunkt wäre gut.

Gruß
Andreas

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
28 Sep 2016 12:24 #37813 by Elektron
Hallo!
Mal wieder hochschieben da ja die dunkle Jahreszeit bevorsteht.
Wie wäre es mit einem Treffpunkt in Darmstadt?

Gruß
Andreas

Please Log in or Create an account to join the conversation.

More
28 Sep 2016 12:38 #37814 by Colde
Servus,

ich wäre auch dabei.

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
13 Nov 2017 21:07 #51180 by Elektron
Hallo!
Mal aus der Versenkung geholt.
Besteht noch Interesse an einem Treffen?

Gruß
Andreas

Please Log in or Create an account to join the conversation.

More
14 Nov 2017 09:16 #51185 by Andys1957
Moin zusammen,

grundsätzlich ja!

Gruß
Andy

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars

Please Log in or Create an account to join the conversation.

  • Heiko-L
  • Heiko-L's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
14 Nov 2017 21:34 #51197 by Heiko-L
Hi!
Mittlerweile habe ich eine Fräse - ein Treffen, warum nicht.

Gruß
Heiko-L
_____________
Hardware: Mechaplus-Fräse,
Software: QCAD, INKSCAPE, ESTLCAM, LINUX CNC

Please Log in or Create an account to join the conversation.

  • Elektron
  • Elektron's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • SC420 Estlcam
More
18 Nov 2017 10:25 #51261 by Elektron
Dann fehlt ja nur noch Ort und Zeit, Vorschläge?

Gruß
Andreas

Please Log in or Create an account to join the conversation.

More
18 Nov 2017 10:55 #51263 by Andys1957
Ort: Gemütliche Kneipe/gemütliches Cafe im Raum Da-Di, wo man sich in Ruhe unterhalten kann. Da ich allerdings kein Kneipen-/Cafegänger bin, kann ich da keine konkreten Vorschläge machen, weil ich diesbezüglich einfach nichts kenne.
Zeit: Da bin ich offen, weil ich nicht mehr im aktiven Berufsleben stehe. Habe allerdings noch einen Minijob, in dem ich unregelmäßig arbeite und oft recht kurzfristig angefordert werde.

Gruß
Andy

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars

Please Log in or Create an account to join the conversation.

  • Heiko-L
  • Heiko-L's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
18 Nov 2017 11:43 #51264 by Heiko-L
Pizzeria bei Ober-Ramstadt zwischen Hahn und Wembach ( = Waldenserhalle), allerdings Sa geschlossen???

Gruß
Heiko-L
_____________
Hardware: Mechaplus-Fräse,
Software: QCAD, INKSCAPE, ESTLCAM, LINUX CNC

Please Log in or Create an account to join the conversation.

More
18 Nov 2017 16:32 - 18 Nov 2017 16:38 #51268 by Andys1957
Ist mir recht, da kann ich fast hinlaufen. Und von mir aus muß es auch nicht Samstag sein.

Gruß
Andy

Nachtrag: Wenn's Sa sein soll, geht's auch hier . Ist ein Ort weiter, und da würde ich dann definitiv laufen... :whistle:

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars
Last edit: 18 Nov 2017 16:38 by Andys1957.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.