file Question Ich hab's getan

  • oldman01
  • oldman01's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
02 Mar 2020 11:27 #58408 by oldman01
Ich hab's getan was created by oldman01
Hallo,

nach genügend vorbereitender Informationen habe ich jetzt gekauft.
Es ist eine D600 mit Performance-Kit, einstellbaren Spindelmuttern, Handrad, PWM-Wandler und Win-PC-NC.
Nicht dabei Nutenplatte.
Ich denke, das läßt sich auch anders organisieren.
Aber, bei einer Bestellung von über 2.000 € nochVersandkosten zu nehmen ist mehr als verwunderlich.

Zur Optimierung meiner Finanzen habe ich die Spindel separat gekauft.
Es ist eine AMB 1050 FME-1 DI Portal. Die gab es sogar mit 3 Spannzangen über 1/4 preiswerter.

Gruß
Achim

SC 2/600, PerformanceKit, T-Nut von Sorotec, HF-500,
Estlcam, WinPC-NC, Turbo-CAD, Delta-CAD, Inkscape, CorelDraw

Please Log in or Create an account to join the conversation.

More
02 Mar 2020 11:50 #58409 by Andys1957
Replied by Andys1957 on topic Ich hab's getan
Hallo Achim,

herzlichen Glückwunsch und viel Spaß mit der Maschine!

Gruß
Andy

Fräse: SC 2/600 mit PerfKit, T-Nut, Vakuum, Kress 1050 FME-1
CAD, CAM, Steuerung: FreeCAD, Estlcam, Estlcam/Arduino ("Forums-Shield")
Laser, Software: Sculpfun S30 Pro, Eleksmaker A3 mit Atomstack R30 (IR), Lightburn
3D-Druck: FB Reborn 2, Art. Genius und Gen. Pro, CTC Bizer, Elegoo Mars

Please Log in or Create an account to join the conversation.

  • MagIO2
  • MagIO2's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Zu viele Ideen und zu wenig Zeit
More
02 Mar 2020 12:13 #58410 by MagIO2
Replied by MagIO2 on topic Ich hab's getan
Na denn mal Glückwunsch und viel Spaß. Als Bausatz, oder Fertig?

Glaubt hier wirklich jemand, dass irgendein Händler auf den Versandkosten sitzen bleibt? Entweder man gibt sie als extra Kosten an, oder man preist es gleich mit ein. Wo ist da der Unterschied? Möglicherweise hat SC noch genügend Laufkuntschaft bzw. Abholer - sonst würde sich ein solcher Showroom ja auch nicht lohnen - da macht es auch noch Sinn, dass die die richtigen Kosten kennen.

SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch

Gruß, Andreas

Please Log in or Create an account to join the conversation.

  • oldman01
  • oldman01's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
02 Mar 2020 12:43 #58412 by oldman01
Replied by oldman01 on topic Ich hab's getan
Optimierung von Finanzen und Freizeit: Bausatz

SC 2/600, PerformanceKit, T-Nut von Sorotec, HF-500,
Estlcam, WinPC-NC, Turbo-CAD, Delta-CAD, Inkscape, CorelDraw

Please Log in or Create an account to join the conversation.

  • MagIO2
  • MagIO2's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Zu viele Ideen und zu wenig Zeit
More
02 Mar 2020 14:11 #58413 by MagIO2
Replied by MagIO2 on topic Ich hab's getan
Ist doch super. Doppelter Spaß zum halben Preis! ;o) Und man kennt anschließend auch sein Maschinchen.

SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch

Gruß, Andreas

Please Log in or Create an account to join the conversation.

More
02 Mar 2020 19:51 #58418 by Reiner St.
Replied by Reiner St. on topic Ich hab's getan
Hallo Achim,
auch von mir ein wilkommen im Club. Bin gespannt auf deine ersten Werke !!

Gruß Reiner

Fräse: SC 2/420, T-Nut, AMB 1050 FME-P, 4-Achse, Fräswanne,WZLS, WinPC-NC, Handrad, Estlcam, Filou NC16basic, NC20expert, Aspire 9.5, DeskProto 7 Multi Axis
Laser: Makeblock XY-Plotter 20W, mLaser 2,5W Laser Neje 7/20W
3D Druck: Anycubic Photon S, i3 Mega S,Chiron,TENLOG TL-3D PRO, Zonestar...

Please Log in or Create an account to join the conversation.

  • oldman01
  • oldman01's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
02 Mar 2020 20:13 #58419 by oldman01
Replied by oldman01 on topic Ich hab's getan
Hallo,

Vielen Dank für die Glückwünsche und das Willkommen.
Schaun wir mal was wird.
Allein der Weg etwas Sinnvolles zu erreichen kann schon ein Ziel sein.

Gruß
Achim

SC 2/600, PerformanceKit, T-Nut von Sorotec, HF-500,
Estlcam, WinPC-NC, Turbo-CAD, Delta-CAD, Inkscape, CorelDraw

Please Log in or Create an account to join the conversation.

  • Andy103er
  • Andy103er's Avatar
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Bitte keine PN's...
More
04 Mar 2020 09:08 #58428 by Andy103er
Replied by Andy103er on topic Ich hab's getan
Hi,
viel Freude und regen Austausch im Forum!

...die Arbeit steckt im Detail.
SC 420/2, HF500, Absaugadapter, Win-PCNC (USB), Estlcam, Fusion 360, [FreeCAD], [PhotoVCarve]

-PS bitte immer Feedback bei gelösten Fragen/Problemen, in den Beiträgen posten. -das hilft uns allen-

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.