file Question SC Arduino Shield für EstlCAM

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
13 Mar 2016 20:45 - 13 Mar 2016 21:05 #32109 by Gunther57
SC Arduino Shield für EstlCAM was created by Gunther57
So.. habs ja versprochen, wenn Der Arduino mit galvanischer Trennung fertig und getestet ist poste ich die Daten zum Nachbau.

Ich hab mit dem Testaufbau schon 2 Leiterplatten gefräst, Gesammtdauer ja Platte ca. 2 Std incl. Werkzeugwechsel.
Durch die Höhenabtastung in Estcam kann ich mit geringen Frästiefen arbeiten und dadurch auch Anschlüsse im 0,65mm Raster sauber fräsen.

Hier mal Bilder vom Fräsen:







so sollte Das fertige Teil aussehen




Der will die ZIP nicht hochladen, warscheinlich sin 4,5MB zuviel

Gruß Gunther


EDIT:
ok hier der link zur Datei

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

This message has attachments images.
Please log in or register to see it.

Last edit: 13 Mar 2016 21:05 by Gunther57.
The following user(s) said Thank You: High-Tower, AndreasLu, peti-digital, Jokel, speedo, Charly58, Bull-Hurley, DocBrown, Neugieriger, Modellbahner

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
15 Mar 2016 20:21 #32164 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Hab grade ein kleinen Fehler bemerkt.

In der .NC Bohrdatei ist fälschlicher Weise ein 0,9mm Bohrer angegeben, das soll 1,0mm sein. Da ist etwas mit meiner Drill-Datei durcheinander geraten.

Sorry

Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
22 Apr 2016 20:27 - 22 Apr 2016 20:27 #33433 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Hab jetzt auch in den Arduino-Clone die zwei Relais-Ausgänge eingebaut.







Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

This message has an attachment image.
Please log in or register to see it.

This message has an attachment file.
Please log in or register to see it.

Last edit: 22 Apr 2016 20:27 by Gunther57.
The following user(s) said Thank You: High-Tower, DocBrown, stiftamohr, Ete, DerRoy

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
15 Jul 2016 16:47 - 15 Jul 2016 16:47 #35823 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Nach Aussage von DocBrown , hab ich die notwendigen Änderungen, für die Verwendung von PWM eingefügt.






Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

This message has an attachment image.
Please log in or register to see it.

This message has an attachment file.
Please log in or register to see it.

Last edit: 15 Jul 2016 16:47 by Gunther57.
The following user(s) said Thank You: Neugieriger, gruendling

Please Log in or Create an account to join the conversation.

More
08 Aug 2016 13:08 #36460 by Mayrhofer
Replied by Mayrhofer on topic SC Arduino Shield für EstlCAM
Hallo
Hast du zufällig auch eine Fertige Platine für 2/840

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
08 Aug 2016 17:33 - 08 Aug 2016 17:34 #36475 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Ich hab hier noch 2 leere Leiterplatten der Version 8.4 runzuliegen.





Bestücken musst du selber. Ich würde die für 5,-€ plus Porto abgeben.

Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

This message has attachments images.
Please log in or register to see it.

Last edit: 08 Aug 2016 17:34 by Gunther57.
The following user(s) said Thank You: robbeh

Please Log in or Create an account to join the conversation.

More
16 Oct 2016 20:32 #38332 by robbeh
Replied by robbeh on topic SC Arduino Shield für EstlCAM
Lieber Gunther,

eine schöne Platine zeigst Du da. Werde ich sicher irgendwann mal in SMD umsetzen. Eine kurze Frage, der FTDI ist doch "Bus Powered", sollte da nicht Pin 17 mit einem 100nF gegen Masse gepuffert werden? Betreibst Du den FTDI-Chip in der Grundkonfiguration, oder hast Du ihn neu programmiert?

Danke und viele Grüße
Robert

Gruß -> Robert

Stepcraft 2/420, HF500
Kärcher T 7/1 eco!efficiency mit Dust Deputy

Astrofotografie , mein anderes Hobby.

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
17 Oct 2016 20:51 #38350 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Hallo Robert,

Ja der FT232 wird vom USB mit 5V versorgt. Die 3,3V out am Pin 17 wird nicht benutzt, warum also dort die Spannung abblocken?
Bei der Arduino Rev.1 Version, von der ich Teile der Schaltung übernommen habe, ist dort ein 100n. Aber der Ausgang geht auch auf einen Komparatoreingang zur Detektierung der externen Versorgungsspannung.

Ich benutze den IC so wie der geliefert wird.

Nur in den ATmega328 musst du ein Bootlader brennen.

Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

Please Log in or Create an account to join the conversation.

More
17 Oct 2016 21:34 #38357 by robbeh
Replied by robbeh on topic SC Arduino Shield für EstlCAM
Hallo Gunther,

danke für die Antwort. Das steht halt so im Datenblatt zum FT232, und ich habe das bisher auch immer so umgesetzt. Geht wohl also auch ohne.
Also nochmal danke für das Teilen der Schaltung. Insbesondere das mit dem ADUM1201 war mir neu, setze derzeit jeweils einen SN74LVC1T45DBVT in den beiden Datenleitungen ein.

Viele Grüße
Robert

Gruß -> Robert

Stepcraft 2/420, HF500
Kärcher T 7/1 eco!efficiency mit Dust Deputy

Astrofotografie , mein anderes Hobby.

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
18 Oct 2016 20:09 #38370 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Hallo Robert

Warum den SN74LVC1T45DBVT, das ist doch ein bidirektionaler Buskoppler. Um von 3,3v auf 5V zu kommen?

Ich hab den ADUM1201 weger der galvanischen Trennung vom USB und ATmaga eingebaut.

Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

Please Log in or Create an account to join the conversation.

More
18 Oct 2016 21:03 #38372 by robbeh
Replied by robbeh on topic SC Arduino Shield für EstlCAM
Hallo Gunther,

ja, der Koppler verhindert, dass der FTDI parasitär über die Datenleitung mit Spannung 'versorgt' wird, sobald nur der MC arbeiten soll. Brauche ich für Dualbetrieb Batterie (MCU gibt Daten über Display aus, FTDI aus) oder USB (MCU gibt Daten auf Display und USB aus). Ist aber ein anderes Projekt. Den 1201 kannte ich bis dato nicht.

LG Robert

Gruß -> Robert

Stepcraft 2/420, HF500
Kärcher T 7/1 eco!efficiency mit Dust Deputy

Astrofotografie , mein anderes Hobby.

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
11 Mar 2017 20:47 #45400 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Hab jetzt die Musterplatten für die hoffentlich letzte Version bekommen.
Muss da noch ein paar Teile auflöten, Stecker und LED.

Vorderseite:



Rückseite:




Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox

This message has attachments images.
Please log in or register to see it.

The following user(s) said Thank You: speedo, ubo, Neugieriger, Modellbahner, robbeh

Please Log in or Create an account to join the conversation.

  • Detlef_1
  • Detlef_1's Avatar
  • Visitor
  • Visitor
12 Mar 2017 12:48 #45405 by Detlef_1
Replied by Detlef_1 on topic SC Arduino Shield für EstlCAM
Hallo Gunther,

wie sieht es aus könntest Du von diesem Projekt auch so eine Art Sammelbestellung machen ?

Ich zb wäre an einer fertig bestückten Platine interessiert... !

Könnte mir vorstellen das hier noch weitere wären...

Gruß

Detlef

Please Log in or Create an account to join the conversation.

  • Gunther57
  • Gunther57's Avatar Topic Author
  • Offline
  • Forum Nutzer
  • Forum Nutzer
More
12 Mar 2017 13:12 #45407 by Gunther57
Replied by Gunther57 on topic SC Arduino Shield für EstlCAM
Darüber kann man nachdenken, wenn ich meine LP ausgiebig getestet habe. Aber ersteinmal müssen da noch fehlende Teile gelötet werden.

Gruß Gunther

Bitte keine PN. Ich bekomme keine Benachrichtigung. Besser ein e-mail.

Hardware: SC1/300, eigenbau Aduino USB V9.6
Software: Win7-64bit, Eagle, QCAD, Freecad, Estlcam V8, V9, V10
Hobby: Elektronik
;Meine DropBox
The following user(s) said Thank You: Modellbahner

Please Log in or Create an account to join the conversation.

  • Detlef_1
  • Detlef_1's Avatar
  • Visitor
  • Visitor
12 Mar 2017 17:59 #45412 by Detlef_1
Replied by Detlef_1 on topic SC Arduino Shield für EstlCAM
Sieht aber sehr interessant aus das ganze alles auf einer Platine zu haben.

Please Log in or Create an account to join the conversation.

More
12 Mar 2017 20:24 #45420 by FitnessKlaus
Replied by FitnessKlaus on topic SC Arduino Shield für EstlCAM
Da kann ich nur zustimmen !!!

Gruß

Klaus

Stepcraft 2/420 - Kress 1050 fme-1 - Estlcam - QCAD

Please Log in or Create an account to join the conversation.

More
13 Mar 2017 06:49 #45426 by Modellbahner
Replied by Modellbahner on topic SC Arduino Shield für EstlCAM
Lieber Gunther!

Da melde ich mich gleich mal an - "Sammelbestellung" das neue Wort 2017

————
SC 2/300, ArduinoShield, EstlCam, Fusion 360

Please Log in or Create an account to join the conversation.

  • Detlef_1
  • Detlef_1's Avatar
  • Visitor
  • Visitor
13 Mar 2017 07:23 #45427 by Detlef_1
Replied by Detlef_1 on topic SC Arduino Shield für EstlCAM
Ja Gunther das Interesse zu diesem Interface
wie Du siehst ist gross.

Somit wären wir schon 3 Leute
Bin mir sicher das noch einige dazu kommen würden...

Please Log in or Create an account to join the conversation.

More
13 Mar 2017 08:01 #45428 by XDiamantX
Replied by XDiamantX on topic SC Arduino Shield für EstlCAM
Da heb ich mal den Finger und tue Kund auch ich habe interesse..

Viele Grüsse
Sven

Please Log in or Create an account to join the conversation.

  • Detlef_1
  • Detlef_1's Avatar
  • Visitor
  • Visitor
13 Mar 2017 14:27 - 13 Mar 2017 14:28 #45438 by Detlef_1
Replied by Detlef_1 on topic SC Arduino Shield für EstlCAM
Siehst du Gunther da sammelt sich was an Leuten an die dran
Interessiert wären an eine Sammelbestellung für diese Leiterplatte.

Vielleicht wenn Du ausgiebig die Platine getestet hast das Du dann mit einer Sammelbestellung kommst ?

Meinerseits wäre an einer Vorbestückten Platine mit SMD Bauteile dran interessiert...

Vielleicht lässt sich mit Sheba was organisieren das er diese Leiterplatte Teilbestückt ( nur mit SMD ) oder auch ganz bestückt?

Wir warten ab bis Deine Platine fertig ist und ganz funktioniert. ;)
Last edit: 13 Mar 2017 14:28 by Detlef_1.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.