- Beiträge: 1
- Dank erhalten: 0
Frage
Problem with VCarve and WinPc-NC USB
- mimi
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
06 Mär 2020 17:17 #58438
von mimi
mimi antwortete auf Problem with VCarve and WinPc-NC USB
good afternoon,
I experience the same issues as listed above. The machine just dives into the machinebed.
What is the solution for this?
I used the winpcnc atc arc mm function to save the toolpaths and winpcnc is set on HPGL.
Can someone help me please
greetings from The hague (NL)
I experience the same issues as listed above. The machine just dives into the machinebed.
What is the solution for this?
I used the winpcnc atc arc mm function to save the toolpaths and winpcnc is set on HPGL.
Can someone help me please
greetings from The hague (NL)
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 224
- Dank erhalten: 81
10 Mär 2020 09:22 - 10 Mär 2020 09:23 #58460
von CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Dieser Beitrag enthält einen Bildanhang.
CNCMiller antwortete auf Problem with VCarve and WinPc-NC USB
Hello All,
Did you checked in WIN-PC NC the attached file setting in Dutch "Beweegrichting omkeren" to switch the movement direction of the Z-axis.
Because the G-code needs this otherwise Z-negative is upwards instead of downwards.
check and have fun.
Did you checked in WIN-PC NC the attached file setting in Dutch "Beweegrichting omkeren" to switch the movement direction of the Z-axis.
Because the G-code needs this otherwise Z-negative is upwards instead of downwards.
check and have fun.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.
Letzte Änderung: 10 Mär 2020 09:23 von CNCMiller.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.