file Frage Cut2D and UCCNC different offsets

  • Trufi Electronics
  • Trufi Electronicss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
Mehr
10 Apr 2017 17:48 #46272 von Trufi Electronics
Cut2D and UCCNC different offsets wurde erstellt von Trufi Electronics
Hi

It seems that I make a project to be centred in Cut2D and then when I import the file into UCCNC it is not centered. What am I doing wrong. Attached is screenshots of what it looks like. Project size is 200mmX200mm



Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
10 Apr 2017 18:27 - 10 Apr 2017 18:28 #46274 von CNCMiller
CNCMiller antwortete auf Cut2D and UCCNC different offsets
Can you show a picture of Cut2D in drawing mode without toolpath?

SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Letzte Änderung: 10 Apr 2017 18:28 von CNCMiller.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Trufi Electronics
  • Trufi Electronicss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
Mehr
11 Apr 2017 16:18 #46289 von Trufi Electronics
Trufi Electronics antwortete auf Cut2D and UCCNC different offsets
hope this is what you want

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
11 Apr 2017 19:49 #46300 von CNCMiller
CNCMiller antwortete auf Cut2D and UCCNC different offsets
Hello trufi,

at first site there is nothing wrong in the Cut2D drawing.
But I suggest to draw a rectangular on the outline of your sketch size 200x200. This will force to set the zero origin in the down left corner. Make for this square a toolpath with a different tool number.
and save both toolpaths in one file.
Set in uccnc the option tool change on (or how that works, I don't know the uccnc program).

Now only let the first toolpath do his work and abort the program at the tool change moment.

hope this will work for you

SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
12 Apr 2017 02:15 #46312 von ger21
ger21 antwortete auf Cut2D and UCCNC different offsets
I believe that the border that you see in UCCNC is your softlimits. Unless you're softlimits for the X and Y axis are both set to 0 min, 200 max, it will not look the same.
As long as your XY zero point is set correctly in UCCNC, the part will be correct.

Gerry


UCCNC 2017 Screenset
www.thecncwoodworker.com/2017.html

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Trufi Electronics
  • Trufi Electronicss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
Mehr
12 Mai 2017 16:17 #47110 von Trufi Electronics
Trufi Electronics antwortete auf Cut2D and UCCNC different offsets
Thanks Guys. It is working perfectly

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.