- Beiträge: 19
- Dank erhalten: 0
Frage
Winpc nc / Vcarvepro multiple toolpaths
- hassage
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
16 Dez 2017 11:43 #51677
von hassage
Winpc nc / Vcarvepro multiple toolpaths wurde erstellt von hassage
Hi guys,
I'm trying to export two tools paths from vcarve pro to winpc-nc.
But when I open the file in. Winpc-nc the file shows both tool paths as one.
Am I exporting wrong from vcarve or am I missing something in winpc-nc.
Thanks
K
I'm trying to export two tools paths from vcarve pro to winpc-nc.
But when I open the file in. Winpc-nc the file shows both tool paths as one.
Am I exporting wrong from vcarve or am I missing something in winpc-nc.
Thanks
K
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 224
- Dank erhalten: 81
16 Dez 2017 19:40 - 16 Dez 2017 19:40 #51679
von CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
CNCMiller antwortete auf Winpc nc / Vcarvepro multiple toolpaths
make sure you have two toolnumbers in the file.
eq. path one toolnr 1, path two toolnr 2
and save both paths to one file
that should work
eq. path one toolnr 1, path two toolnr 2
and save both paths to one file
that should work
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Letzte Änderung: 16 Dez 2017 19:40 von CNCMiller.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.