file Frage Machine drilling too deep

Mehr
24 Jul 2019 12:47 #57091 von ariana.aa
Machine drilling too deep wurde erstellt von ariana.aa
Hi,

As I was using the CNC machine, it cut through my material (3mm) and the sacrificial layer. I had programmed it to cut with the depth of 3mm. The code the machine was reading showed that it was supposed to be cutting 1.4 mm while it was actually cutting about 68 mm deep. I had already calibrated the surface of the material to be 0 on Z axis and I even started the cut at a higher level of 30mm. How can I solve this issue, and what could be causing this problem? Is there a way too put a limit on the machine so it will automatically stop after a certain depth?

Thanks,
Ariana

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.