Gantry of the STEPCRAFT Q.408 with igus energy chain for cable routing

Application · Process integration

Integrating CNC milling into your production

As a fixed station in a production line or as a custom set-up for a specific task: the M- and Q-Series can be integrated into existing processes. Together with you, we match the machine, set-up and equipment to your process.

  • Fixed station in the production line
  • Custom set-ups for your task
  • Up to 1302 × 2670 mm on the Q.408

Why integrate

The CNC router as a station in the process

Many machining steps are repeated for every part: drilling patterns, cut-outs, grooves or markings. If the machine sits directly in the process, it carries out this step where it is needed.

A fixed work step

The machine takes on a defined task in your line and runs the same program for every part.

Identical parts in succession

A fixed zero point, stops and fixtures ensure that every workpiece is positioned and machined in the same way.

Short distances

Workpieces stay in the process instead of going to a separate machining station or to a supplier.

Possible uses

How STEPCRAFT machines fit into processes

Typical tasks for which businesses integrate a CNC router permanently into their production.

Station in the production line

The machine stands as a fixed workstation in the line and machines every part in the same sequence, for example drilling patterns, cut-outs or grooves.

Marking and engraving

Serial numbers, logos, markings or rating plates directly on the part before it moves on.

Machining in a fixture

Workpieces always sit in the same position in a fixture; the machine processes them one after the other with the same program.

Several steps, one station

With the tool changer of the M- and Q-Series, operations with different tools run one after the other without manual changeover.

Cutting to size and formatting

Sheets and blanks in fixed formats, on the Q.408 up to 1302 × 2670 mm in one setup.

Custom set-ups

Custom frames, adapted enclosures or several machines side by side, matched to part, space and process.

Related applications: Prototypes & small series · Woodworking · Sign making

Mechanical integration

What makes integration easier

The M- and Q-Series are built from aluminium profiles. This makes it easy to attach fixtures, stops and add-on parts and to adapt the machine to its surroundings.

Aluminium T-slot tables

Aluminium T-slot tables take fixtures, stops and clamping equipment directly: standard on the Q.408, available as an accessory for the M-Series.

Base frames and enclosures

Base frames for the M-Series and enclosures for the M.500 to M.1000. The Q.408 stands on its own base frame with an integrated control cabinet.

Clamping for series

Vacuum tables for the M-Series, vacuum pads and pop-up pins as retractable stops for the Q.408.

Coordinated in discussion

How the machine is connected to your line is something we clarify together on the basis of your process.

Approach

How we bring the machine into your process

Every integration is different. That is why we start with your part and your process.

  1. Describe the processPart, work step, quantity and space in the line: the more precise the task, the better the recommendation.
  2. Check feasibilityBring your part or drawing to a demonstration in Menden. There you will see the machine working on your task.
  3. Define the set-upWe match machine, frame, enclosure, clamping equipment and features to your process.
  4. Induction and startWe support your start with training and support directly from the manufacturer.

Machines

The right machines for process integration

The focus is on the M- and Q-Series. Which one fits depends on part size, cycle time and space.

M-Series

Compact station for the line

Four sizes up to 979 × 1444 mm, linear guides and aluminium profile frame; expandable with tool changer and enclosure (M.500 to M.1000).

  • Suitable forDrilling patterns, cut-outs, engravings on individual parts
  • Working areaup to 979 × 1444 mm

from €2,249

To the M-Series →

Q-Series

For sheet formats and high throughput

Working area 1302 × 2670 mm, closed-loop drive, base frame with integrated control cabinet, tool changer and pop-up pins.

  • Suitable forPanel cutting, series parts, large formats
  • Working area1302 × 2670 mm

from €20,199

To the Q-Series →

For small parts and simple tasks, the D-Series is also an option. To the D-Series →

Compare CNC routers →

Accessories for CNC routers →

FAQ

Frequently asked questions about process integration

More answers in the machine comparison or by talking to us directly.

Compare CNC routers →

Can a STEPCRAFT machine be installed in an existing line?

Yes. The machine can be integrated mechanically via aluminium profiles with T-slots, base frames and fixtures. Which solution fits depends on the part, process and space; we clarify this together.

Are custom set-ups available?

Yes. We match frames, enclosures and equipment to your task. Contact us with your part.

Can I test the machining beforehand?

Bring your part or drawing to a demonstration in Menden. There you will see how the machine handles your task.

How is the machine controlled?

With the STEPCRAFT control software on a Windows® PC. How the control fits into your process is something we discuss case by case.

M-Series or Q.408?

The M-Series suits individual parts up to 979 × 1444 mm and limited space in the line. The Q.408 machines full sheets up to 1302 × 2670 mm and is designed for high throughput.

Add CNC to your process?

Describe the part, work step and environment. We will check which machine and set-up suit your production.