
Application · Sign making
CNC router for sign making and display production
Produce letters, signs, displays and lettering from acrylic, aluminium composite panels, rigid PVC foam and aluminium in-house. Milling, engraving and vinyl cutting with one machine.
Applications
What sign makers produce with CNC
Many sign-making jobs are one-off pieces with short deadlines. With your own machine, you produce without waiting for a supplier.
Letters and logos
Milled-out profile letters and logos from acrylic, rigid PVC foam or aluminium.
Signs and panels
Company, practice and information signs with cut-outs, chamfers and holes.
Engravings
Rating plates, lettering and wayfinding systems with engraving bit or engraving laser.
Composite panels
Milling aluminium composite panels and preparing them with V-grooves for folding.
Displays and stands
Stands, holders and slot-together connections from acrylic and plastic.
Vinyl and lettering
Cutting plotter vinyl, flock film and paper with the drag knife.
Related applications: Architecture firms · Prototyping · D-Series for small signs
Workflow
From design to finished sign
The process is the same for letters, signs and composite panels.
- Prepare vector dataLogo or lettering as a vector file from your graphics program, for example DXF, SVG or PDF.
- Create toolpathsDefine contours, pockets, chamfers and V-grooves in the CAM program, for example with Vectric VCarve or Cut2D.
- Clamp and mill the sheetClamp the sheet on a spoilboard or vacuum table; the machine mills cut-outs, engravings and holes.
- Deburr and assembleDeburr the edges, fold composite panels along the V-grooves, assemble letters and signs.
Machines
The right machines for sign making
The choice depends mainly on the sheet format.
M-Series
For letters, signs and engravings
Four sizes up to 979 × 1444 mm, linear guides and optional HIWIN® ball screws for clean contours in plastic and aluminium.
- Suitable forLetters, signs, engravings, smaller sheets
- Working areaup to 979 × 1444 mm
from €2,249
Q-Series
For full sheets
The Q.408 machines standard 1250 × 2500 mm sheets in one setup. Pop-up pins and tool changer shorten set-up times for series.
- Suitable forComposite panels, large signs, series
- Working area1302 × 2670 mm
from €20,199
For vinyl and engravings, the D- and M-Series can be extended with a drag knife, tangential knife or engraving laser. To accessories & tools →
Materials
Materials in sign making
The typical sheet materials used in sign making can be machined on all STEPCRAFT series; for aluminium and full sheets, the M- and Q-Series are suitable.
| Material | Note |
|---|---|
| Acrylic (PMMA), cast and extruded | Single-flute cutters for plastics; cast acrylic gives clearer milled edges |
| Aluminium composite panels | Milling cut-outs, V-grooves for folds |
| Rigid PVC foam, polystyrene | High feed rates possible, fine contours clean |
| Aluminium, brass | Engravings and cut-outs; minimum quantity lubrication available as an accessory |
| Vinyl, flock film, paper | Drag knife instead of cutter |
FAQ
Frequently asked questions
More answers in the machine comparison or by talking to us directly.
Can I cut vinyl with a STEPCRAFT?
Yes. With the drag knife in the Ø 43 mm holder, you cut plotter vinyl, flock film and paper.
Which machine for aluminium composite panels?
For cut-to-size panels up to 979 × 1444 mm, the M-Series; for full sheets, the Q.408 with a working area of 1302 × 2670 mm.
How do I get clear edges in acrylic?
With single-flute cutters for plastics, the right speed and sufficient feed so that the material does not melt. Cast acrylic gives clearer edges than extruded.
Can I engrave as well?
Yes, with an engraving bit in the milling spindle or contact-free with the DL445 engraving laser on the D- and M-Series.
Which sheet formats fit on the machines?
The D-Series machines up to 594 × 833 mm, the M-Series up to 979 × 1444 mm, the Q.408 up to 1302 × 2670 mm and therefore standard 1250 × 2500 mm sheets. Larger formats such as 3050 × 1500 mm are cut to size beforehand.
Can I mill V-grooves in aluminium composite panels?
Yes. With a V-groove cutter, you mill the groove from the back to just short of the front skin and then fold the panel by hand.
Produce signs in-house?
Tell us your sheet formats, materials and typical jobs. We will recommend machine and tools.
