About us
STEPCRAFT: CNC routers from Menden
Since 2012, we have been developing and building CNC routers in Menden for workshops, businesses and educational institutions. What began with two founders on 8 m² is today a manufacturer with three machine series up to the Q.408 for full sheets, its own accessories range and dealers in more than 40 countries.

- Founded in 2012 by Peter Urban and Markus Wedel
- 2,500 m² at our headquarters in Menden
- 3 series, 8 sizes from D.420 to Q.408
- More than 30,000 machines sold
History
From 8 m² in Iserlohn to 2,500 m² in Menden
In December 2012, Peter Urban and Markus Wedel founded STEPCRAFT GmbH & Co. KG. Development, planning and coordination initially took place on 8 m² in Iserlohn. The idea: a CNC router for your own workshop that can be equipped with accessories such as a milling spindle or drag knife for different tasks.
Demand was there from the start. Four months after the company was founded, the first additional rooms were added, and by early 2015 another 370 m². In 2016, the Iserlohn site became too small, and the headquarters moved to neighbouring Menden, with 2,500 m².
The two-person start-up has become a manufacturer with three machine series and its own accessories range. What has remained are short decision-making paths, a family atmosphere and openness to new ideas.

Milestones
- 2012Founding of STEPCRAFT GmbH & Co. KG in December in Iserlohn.
- 2016Move to Menden New headquarters with 2,500 m².
- 2020M-Series Linear guides, two table levels and removable machine table for Freestyle Milling™.
- 2022New D-Series Completely redesigned, with All-Steel Motion System™, hollow-chamber profiles and igus® lead screws.
- 2024Q.408 Second generation of the Q-Series, designed for sheet processing and continuous use in production.
Machines
Three series from one source
Each series is developed for a different use. What they all have in common: they can be extended with STEPCRAFT tools and accessories, from the engraving laser to the tangential knife.

Since 2012, new in 2022
D-Series
For getting started, model making and schools. Assembled as a kit in six to eight hours or delivered ready to run.

Since 2020
M-Series
For workshops and businesses. Linear guides, two table levels and a removable table that also lets you machine floors, furniture and large panels.

Since 2024
Q-Series
For full sheets and series. The Q.408 machines 1302 × 2670 mm, with closed-loop drive and optional tool changer.

Location
Everything in one place in Menden
Development, sales, service and training come together at our headquarters in Menden. This means you get advice, spare parts and answers directly from the manufacturer.
- Showroom with D-, M- and Q-Series
- Repair service and spare parts
- Collection of orders by appointment
How we work
How we work
One platform, many tools
The D- and M-Series are modular by design: milling spindle, laser, knives, probe and, on the M-Series, the plasma cutter use the same holder. This way, the machine grows with your tasks.
Open technical data
Working area, drive, repeatability and prices are listed on the website for every model. You compare for yourself before you talk to us.
Direct from the manufacturer
Advice, training, repairs and spare parts come from the team that develops the machines. We also stock spare parts for earlier generations.
Local support worldwide
Outside Germany, STEPCRAFT machines are available through our dealer network, with local advice and service.
More about STEPCRAFT
Get to know us
Where is STEPCRAFT based?
The headquarters of STEPCRAFT GmbH & Co. KG is at An der Beile 2, 58708 Menden, Germany.
How long has STEPCRAFT existed?
Since December 2012. The company was founded by Peter Urban and Markus Wedel in Iserlohn; since 2016 it has been based in Menden.
Where are the machines developed?
Development, sales, service and training are located at our headquarters in Menden.
Can I visit STEPCRAFT?
Yes. In our showroom in Menden, we show you the D-, M- and Q-Series in operation by appointment.
Which machines does STEPCRAFT make?
CNC gantry routers in three series: the D-Series for getting started and training, the M-Series for workshops and businesses, and the Q-Series for sheet processing, plus tools and accessories from the engraving laser to the tool changer.
Visit us in Menden
See the machines in our showroom and talk to us directly about your project.
