Question
Track Roller Tightening Tip
- Doug
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
23 Mar 2017 20:29 #45824
by Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
This message has an attachment image.
Track Roller Tightening Tip was created by Doug
A tip if, like me, you find that the track rollers are actually too tight instead of too loose on assembly into the extrusion. I had to insert the module into the extrusion and tighten the fixed track rollers from the end. See attached picture.
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
This message has an attachment image.
Please log in or register to see it.
The following user(s) said Thank You: DocBrown, Bodo
Please Log in or Create an account to join the conversation.