- Beiträge: 2
- Dank erhalten: 0
Frage
Stepcraft 420 questions
- Canuck
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
24 Jul 2015 06:31 #23698
von Canuck
Stepcraft 420 questions wurde erstellt von Canuck
Hi all: I am new to cnc and new to the forum. I have a couple of questions about the Stepcraft 420.
1/ Does the kit come with a spindle (Cutting tool) or do I have to purchase one in addition to the kit?
2/ I can't tell from the information on the site but are the orange pieces plastic or aluminum?
Thank you
Steve B.
1/ Does the kit come with a spindle (Cutting tool) or do I have to purchase one in addition to the kit?
2/ I can't tell from the information on the site but are the orange pieces plastic or aluminum?
Thank you
Steve B.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- speedo
-
- Offline
- Forum Nutzer
-
- 420v1 / Sorotec Vakuumtisch / EstlCAM+CNC
24 Jul 2015 07:37 #23699
von speedo
Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
speedo antwortete auf Stepcraft 420 questions
1/ Does the kit come with a spindle (Cutting tool) or do I have to purchase one in addition to the kit?
You need a spindle. For soft material a Proxxon is a good choise. If you plan to mill hardwood and metal take a HF spindle (expensive but quiet) or a Kress (cheaper, loud)
2/ I can't tell from the information on the site but are the orange pieces plastic or aluminum?
Painted Aluminium.
You need a spindle. For soft material a Proxxon is a good choise. If you plan to mill hardwood and metal take a HF spindle (expensive but quiet) or a Kress (cheaper, loud)
2/ I can't tell from the information on the site but are the orange pieces plastic or aluminum?
Painted Aluminium.
Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- drilldevil
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 1393
- Dank erhalten: 255
24 Jul 2015 09:57 #23705
von drilldevil
Andreas
drilldevil antwortete auf Stepcraft 420 questions
sorry, it's not painted it is powder-coated 
Andreas
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Canuck
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 2
- Dank erhalten: 0
24 Jul 2015 18:00 #23720
von Canuck
Canuck antwortete auf Stepcraft 420 questions
thanks for the replies. I would think it would be a good idea to include a spindle tool with the new machine so the buyer could REALLY have a machine that was ready to use out of the box.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.