- Beiträge: 2
- Dank erhalten: 0
Frage
Y Axis motor
- jujuglow
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
21 Mai 2017 05:27 #47436
von jujuglow
Y Axis motor wurde erstellt von jujuglow
So I just assembled my machine and the Y axis motor will not turn. Once power is on it just locks, but as soon as power is disconnected I can turn it. Anyone know what is going on? I have checked the wires to make sure they are in their proper slot and they are....Please help!!!!!!!
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- jujuglow
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 2
- Dank erhalten: 0
21 Mai 2017 06:58 #47438
von jujuglow
jujuglow antwortete auf Y Axis motor
disregard..problem somewhat resolved!
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Doug
-
- Offline
- Forum Nutzer
-
21 Mai 2017 07:14 #47439
von Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
Doug antwortete auf Y Axis motor
Please tell us how you resolved the issue so that others can learn from it.
Thanks.
Doug
Thanks.
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
Bitte Anmelden oder Registrieren um der Konversation beizutreten.