Benachrichtigungen
Alles löschen
Introduce Youself
3
Beiträge
2
Benutzer
0
Reactions
777
Ansichten
Themenstarter
Just got an old Stepcraft 2 d840. Rebuilt it and now I´m learning how to master it!
First mod is to re-route the x-z cables to put that overthinking out of the equation.
Next is to get the Fusion 360 -> post (winpc-nc.cps) -> winPc-Nc -> stepcraft 2 d840 to work. That I will comtinue in a different part of the forum.
Located in south east sweden building guitars, cars and mopeds!
Take care!
/Jonas
Veröffentlicht : 30/12/2024 4:23 p.m.
Welcome to the land of Koenigsegg and Nobel Prizes :-))
Yes, curious to see what's going on with your X-Z cables.
Regards
STEPCRAFT D.640 (2018) - UC100
Softwares : UCCNC v.3.6 // Fusion 360 (3D + G-code) // Solidworks // Inskape 2D .
Options : Tool Lenght TS-32 // 4th axis // MM1000 // HF 500 // Tool Change // to be continued...
Veröffentlicht : 07/01/2025 3:15 a.m.
Themenstarter
Hi!
I´m a fast replyer....not.
Regarding the cables a 3d printed an adapter self-clamping/locking to the left side panel so that the cable tube is all "outside" the machine back to the control card instead of under/inside the machine where it always got stuck.
/Jonas
Veröffentlicht : 08/11/2025 3:05 p.m.
