- Beiträge: 61
- Dank erhalten: 50
Frage
Cutting G10
13 Nov 2015 18:30 - 13 Nov 2015 18:46 #26951
von jonalm
Cutting G10 wurde erstellt von jonalm
Ive been cutting some 3.2mm G10 and noticed cutting around a curve the cnc seems to get some chatter/noise.
Any ideas whats going on? (see video) End result was perfect though!
3mm endmill, 4or5 passes @0.7mm if i can remember correct.
Any ideas whats going on? (see video) End result was perfect though!
3mm endmill, 4or5 passes @0.7mm if i can remember correct.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.