Benachrichtigungen
Alles löschen
Show us your Stepcraft Creations
5
Beiträge
2
Benutzer
0
Reactions
4,978
Ansichten
Themenstarter
Stepcraft 420
Plain 6mm Perspex sprayed black (reverse sprayed gold)
30 deg 2 mm dia engraving tool
12000 rpm
800 mm/min feed
0.05 mm step over
0.5 mm cut depth
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 10/01/2015 9:37 p.m.
I want your cutting bed! Might have to look into this for my 600!
Veröffentlicht : 03/02/2015 2:06 p.m.
Themenstarter
I had access to a Bridgeport manual milling machine which I made the plate on. It sits on top of the original wooden bed.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 04/02/2015 12:00 a.m.
Oh I see so it isn't actually providing any rigidity? Does it still sit completely level?
Veröffentlicht : 04/02/2015 12:32 a.m.
Themenstarter
I used a DTI and its within 0.1 mm front to back left to right. Which is good enough for me.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 04/02/2015 1:20 a.m.
