Hi Carlokko. Please see my recent posts on this subject which are summarised below. I believe that the majority of Y axis 'mechanical tu...

I use a soft, lint free cloth and neat isopropyl alcohol which can be bought cheaply in reasonable quantities from several eBay suppliers in the U.K. ...

O.k., I'm pleased you got it doing what you want and got your confidence in it. Frankly, I think that the biggest design issue with these machines ...

I agree it's a damnably unbaked product and I hate it too! I bought one 600 from StoneyCNC in kit form and it was a Triumph des Willens to get it asse...

Still for sale.

Steve, I believe that the majority of Y axis 'mechanical tuning' issues that people are experiencing are due to the inability of the end plates to ...

Today, in addition to enlarging the size of the bearing rebates in the front plate, I have also had to substantially enlarge the size of the screw mou...

Hi there. I understand your frustration here and I feel some of it myself. Stepcraft should provide detailed instructions on the sensitivities of t...

When I finish readjusting the Y axis, I will reduce the G00 maximum feed rate from 3,000 mm/min to 2,000 mm/min in the UCCNC settings and take the hit...

When I finish readjusting the Y axis, I will reduce the G00 maximum feed rate from 3,000 mm/min to 2,000 mm/min in the UCCNC settings and take the hit...

I'm having this issue as well in X. I have tried losing everything and doing it back up but it still jams at random places. I've played with them so m...

Hi Ed, Edd, Edward, Eddie? Welcome to the forum. Since violins tend to make nice sounds, I would say that was a good thing to compare it to 😉 ...

Peter, which pump is your system equipped with? Mine is from Hailea and the model is called ACO-208. Mine is also the Chinese made Hailea model which...

It seems that the problem is with either X or Z or both limit switches. Annoyingly, activation of one limit switch to open circuit/off initiates ALL T...