Richard Fulton
@trufi-electronics
Active Member
Beigetreten: Okt 26, 2016
Last seen: Okt 8, 2018
Themen: 2 / Antworten: 6
Antwort
Laser create lines between objects. m-codes seems wrong ?

I had to program my own Tool Path and Post Processor file in Vectic Cut2D. It may not be perfect but it does work. I can send it if you need it still.

Vor 6 Jahren
Antwort
DL445 Laser & UCCNC

I have the same issue using Cut2D. I have to go in and manually edit the M11 and M10Q?? command. It does put in M10S0 but then the laser seems to be a...

Vor 6 Jahren
Antwort
UCCNC running in demo mode

Just an update. I deleted drivers, shut down PC, restarted. Connected the USB cable to the UC100. The drivers already came up. I had downloaded the dr...

Vor 7 Jahren
Forum
Antwort
UCCNC running in demo mode

The drivers are still installed. We used the unit last week. Then Windows said it had a big update to do and now nothing. If you plug the USB cable in...

Vor 7 Jahren
Forum
Topic
Forum
Replies: 4
Views: 8390
Antwort
Cut2D and UCCNC different offsets

Thanks Guys. It is working perfectly

Vor 7 Jahren
Forum
Antwort
Cut2D and UCCNC different offsets

hope this is what you want

Vor 8 Jahren
Forum
Topic
Forum
Replies: 5
Views: 4522