'HOME ALL' problem with Y axis

Encountering a 'HOME ALL' issue specifically with the Y axis. Upon initiating the 'HOME ALL' command, the Y axis fails to home properly, potentially leading to misalignment or inaccurate positioning. Investigating potential causes such as mechanical obstructions https://storysaver.page/, wiring issues, or configuration settings discrepancies is crucial. Ensuring that the Y axis is properly calibrated and free from any hindrances should resolve the problem for accurate homing functionality.

The “HOME ALL” Y-axis issue ordinarily shows off base homing course, flawed constrain switch, or off-base firmware settings. Check engine wiring, alter Y-axis heading if required, test the endstop physically, and recalibrate steps to guarantee precise homing.
https://youtubvanced.com