- Beiträge: 2
- Dank erhalten: 0
Frage
software updates
- jimpar
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
23 Apr 2016 11:24 #33454
von jimpar
software updates wurde erstellt von jimpar
where and how do i get to update UCCNC software, it appears to be unpossible through the the program itself ............
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- DocBrown
-
- Offline
- Forum Nutzer
-
23 Apr 2016 13:28 #33467
von DocBrown
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
DocBrown antwortete auf software updates
Here:
UCCNC
and here:
Software
Be careful and read the notes when changing between major releases ("profiles...").
I have not updated to the latest version since I did not get the latest profile for my 2/420. I think I've to make some screenshots of all configurations and then step by step define a profile for myself.
Be careful and read the notes when changing between major releases ("profiles...").
I have not updated to the latest version since I did not get the latest profile for my 2/420. I think I've to make some screenshots of all configurations and then step by step define a profile for myself.
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
Folgende Benutzer bedankten sich: jimpar
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- jvalencia
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 152
- Dank erhalten: 97
06 Mai 2016 19:11 #33936
von jvalencia
The only profile that gets changed when upgrading is the Default profile. If you have a custom profile, it's safe. I update on every software release and I've had no problems at all.
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
jvalencia antwortete auf software updates
DocBrown schrieb: Here: UCCNC and here: Software
Be careful and read the notes when changing between major releases ("profiles...").
I have not updated to the latest version since I did not get the latest profile for my 2/420. I think I've to make some screenshots of all configurations and then step by step define a profile for myself.
The only profile that gets changed when upgrading is the Default profile. If you have a custom profile, it's safe. I update on every software release and I've had no problems at all.
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
Folgende Benutzer bedankten sich: DocBrown
Bitte Anmelden oder Registrieren um der Konversation beizutreten.