Suche
Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen

What CNC Fair/Exhibition in Germany?

9 Beiträge
3 Benutzer
0 Likes
6,040 Ansichten
Giulio Buccini
(@julius)
Beiträge: 212
Reputable Member
Themenstarter
 

Is there any interesting fair/event in Germany where one can take a close look to CNC and/or router machines from manufacturers or vendors?
Any recommendation/advice?

I search a place where I can drool a little... ahahhahah! 😆

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

 
Veröffentlicht : 21/09/2016 2:22 pm
ZenziWerken
(@speedo)
Beiträge: 901
Noble Member
 

Visit sorrotec at the Hausmesse 8th. october :

or Faszination Modellbau Friedrichshafen 29th, 30th. October
http://www.faszination-modellbau.de/faszination-modellbau/

Daniel
-----
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen

 
Veröffentlicht : 21/09/2016 3:08 pm
Giulio Buccini
(@julius)
Beiträge: 212
Reputable Member
Themenstarter
 

Sorotec open-day is very intriguing but... a lot of kilometers (from Munich) to see the products of just one manufacturer ....mmmmh... I don't know.
As I see they will be present also at the Modelbau event, so maybe it would be better to meet them in Friedrichshafen. There will other router manufacturers than Sorotec at the exhibition? CNC-step will be there?

As I see, the only "big" event for CNC is the italian BI.MU. 2016 in October (Milan). Nothing else??? :unsure:

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

 
Veröffentlicht : 21/09/2016 4:05 pm
ZenziWerken
(@speedo)
Beiträge: 901
Noble Member
 

a lot of kilometers (from Munich)

It by far the most interesting fair you'll get with-in 333 km 🙂
and on a Sunday the A8 might not be that bad

to see the products of just one manufacturer

That's not true: you can see Sorotec, BZT, Stepcraft, Köhler (SKCNC) and maybe a KIM (like last year?).
Furthermore you see some suppliers (like HIWIN, Benzan, Stritzlberger)

As I understood there might be an interesting evening talking to some people, drinking a beer or two.

Daniel
-----
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen

 
Veröffentlicht : 21/09/2016 4:13 pm
Giulio Buccini
(@julius)
Beiträge: 212
Reputable Member
Themenstarter
 

Well...
if somebody lives in Munich and wants to drive to Withig on Saturday.... then I'm with you! :woohoo:
(Obviously, we will share fuel cost)

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

 
Veröffentlicht : 21/09/2016 4:26 pm
(@rahul)
Beiträge: 569
Honorable Member
 

Question:
You live in Munich and write in english? We've got a german speaking forum group..

Fräse: SC 2/840 USB, Proxxon IBS/E STEPCRAFT HF-500, Werkzeugwechsler + WZLS + T-Nutentisch
3D-Drucker: MendelMax 1.5
CAD: Designspark Mechanical, Eagle
CAM: Estlcam V9, DeskProto

 
Veröffentlicht : 21/09/2016 4:52 pm
Giulio Buccini
(@julius)
Beiträge: 212
Reputable Member
Themenstarter
 

Question:
You live in Munich and write in english? We've got a german speaking forum group..

It's better for everyone that I don't start writing in german, believe me. Ahahahahah! 😆

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

 
Veröffentlicht : 21/09/2016 5:51 pm
ZenziWerken
(@speedo)
Beiträge: 901
Noble Member
 

I can post this in the german group for you. I know of at least on user living in (or near) Munich.
Actually I'd really love to visit Sorotec myself (packing some money and hoping for a good deal on a vacuum table :cheer: ). Would be driving from Würzburg though.

Daniel
-----
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen

 
Veröffentlicht : 21/09/2016 5:53 pm
Giulio Buccini
(@julius)
Beiträge: 212
Reputable Member
Themenstarter
 

I can post this in the german group for you. I know of at least on user living in (or near) Munich.

Yes, please.

If you can then, relocate yourself to Munich asap, so we can go together! 🙂 🙂 🙂

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

 
Veröffentlicht : 22/09/2016 12:31 am
Teilen: