file Frage CUTTING SILVER BRASS COPPER

  • Pianetagame
  • Pianetagames Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
Mehr
13 Jul 2017 09:02 #48741 von Pianetagame
CUTTING SILVER BRASS COPPER wurde erstellt von Pianetagame
Before I bought the STEPCRAFT, I wanted to know
if it's possible to "CUT" silver, copper, brass (1,5 mm) with stepcraft 300 and Kress 1050 OR Stepcraft spindle?
Below, a very short video, of what I have to do.


Sorry for my english...

Regards

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
13 Jul 2017 09:58 #48742 von DocBrown
DocBrown antwortete auf CUTTING SILVER BRASS COPPER
I have some experience with Aluminum and the quality depends on the type of material.

Here I found an example of someone who used a 2/300 milling brass: Brass

He also sad that MS58 was ok but MS60 type a problem.

However it´s a qustion of the used end-mill and used parameter. Anything other than wood is more complicated (plastic and metal).

Viele Grüße

Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
Folgende Benutzer bedankten sich: Pianetagame

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Pianetagame
  • Pianetagames Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
Mehr
13 Jul 2017 10:51 #48743 von Pianetagame
Pianetagame antwortete auf CUTTING SILVER BRASS COPPER
thanks for the tip. Let's see if someone else has done similar jobs.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2020 STEPCRAFT GmbH & Co. KG