- Beiträge: 12
- Dank erhalten: 0
Frage
I just purchased a used 600
- hmatyas
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
25 Okt 2017 05:20 #50933
von hmatyas
I just purchased a used 600 wurde erstellt von hmatyas
Today I purchased a used Step Craft 600 version 2 with an auto tool changer.
I temporary connected the machine and got it to home.
My goal is to enclosed the 600 in a box to control the dust.
Is there a vacuum attachment for the auto tool changer?
I temporary connected the machine and got it to home.
My goal is to enclosed the 600 in a box to control the dust.
Is there a vacuum attachment for the auto tool changer?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Rahul
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 569
- Dank erhalten: 122
25 Okt 2017 12:26 #50934
von Rahul
Not at the moment.
I think the problem is that the "wall" of the attachment needs to be displaced evertime a tool is changed.
Workaround:
Some users (without the tool changer) use magnetic connected brushes.
These could be used when displaced before tool change and replaced after that.
Fräse: SC 2/840 USB,Proxxon IBS/E STEPCRAFT HF-500, Werkzeugwechsler + WZLS + T-Nutentisch
3D-Drucker: MendelMax 1.5
CAD: Designspark Mechanical, Eagle
CAM: Estlcam V9, DeskProto
Rahul antwortete auf I just purchased a used 600
hmatyas schrieb: Is there a vacuum attachment for the auto tool changer?
Not at the moment.
I think the problem is that the "wall" of the attachment needs to be displaced evertime a tool is changed.
Workaround:
Some users (without the tool changer) use magnetic connected brushes.
These could be used when displaced before tool change and replaced after that.
Fräse: SC 2/840 USB,
3D-Drucker: MendelMax 1.5
CAD: Designspark Mechanical, Eagle
CAM: Estlcam V9, DeskProto
Folgende Benutzer bedankten sich: hmatyas
Bitte Anmelden oder Registrieren um der Konversation beizutreten.