- Beiträge: 122
- Dank erhalten: 91
Frage
Homemade Scalextric Car Body (Part3) Vacuum Form
- Mr. B
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
18 Sep 2015 20:24 - 18 Sep 2015 20:44 #25146
von Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Dieser Beitrag enthält Bilddateien.
Homemade Scalextric Car Body (Part3) Vacuum Form wurde erstellt von Mr. B
Please note this was a rush job, so looks a bit rough hahaha, but worked great.
Made a box, drilled 4mm suction holes on top and a 32mm hole on the one side for hoover.
Milled out frame to hold an ice cream tub lid whilst it was being heated with a paint stripping gun.
Hoover attached and switched on I then heated the ice cream tub lid and dropped it on to the scalextric car body mold.
I then left the hoover on for about 1 min then removed the scalextric car body mold from the ice cream tub lid.
Made a box, drilled 4mm suction holes on top and a 32mm hole on the one side for hoover.
Milled out frame to hold an ice cream tub lid whilst it was being heated with a paint stripping gun.
Hoover attached and switched on I then heated the ice cream tub lid and dropped it on to the scalextric car body mold.
I then left the hoover on for about 1 min then removed the scalextric car body mold from the ice cream tub lid.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.
Letzte Änderung: 18 Sep 2015 20:44 von Mr. B.
Folgende Benutzer bedankten sich: High-Tower, mcc, Worldhusky, Pepe, Rory, speedo, hale2160, DJjuanSA
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- jvalencia
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 152
- Dank erhalten: 97
18 Sep 2015 23:50 #25149
von jvalencia
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
jvalencia antwortete auf Homemade Scalextric Car Body (Part3) Vacuum Form
Amazing!
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
Folgende Benutzer bedankten sich: Mr. B
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- hale2160
-
- Offline
- Forum Nutzer
-
20 Sep 2015 09:56 #25183
von hale2160
SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad
hale2160 antwortete auf Homemade Scalextric Car Body (Part3) Vacuum Form
Love the cars colour scheme! Fantastic, I will have to have go at making one of your vac formers, thanks!
SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad
Folgende Benutzer bedankten sich: Mr. B
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Mr. B
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 122
- Dank erhalten: 91
20 Sep 2015 11:32 #25187
von Mr. B
Cheers haha,
As you may see from the vacuum box I used a hot glue gun to glue it together and this also helped seal it.
I now just need to cut out the windows and wheel arches, figure out a way of fixing the body to the chassis and then take it for a spin haha.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Mr. B antwortete auf Homemade Scalextric Car Body (Part3) Vacuum Form
hale2160 schrieb: Love the cars colour scheme! Fantastic, I will have to have go at making one of your vac formers, thanks!
Cheers haha,
As you may see from the vacuum box I used a hot glue gun to glue it together and this also helped seal it.
I now just need to cut out the windows and wheel arches, figure out a way of fixing the body to the chassis and then take it for a spin haha.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Folgende Benutzer bedankten sich: hale2160
Bitte Anmelden oder Registrieren um der Konversation beizutreten.