We are doing 2-side milling and when we flip our material, we need to be as precise as possible (within 0,3 mm).
I have read that it is possible have edge sensors in order to do this. Do anyone have experience with similar problems and can point us towards the right direction?
IMHO if you need to flip your material, why don't you use a frame you can flip / turn it inside ? This way you'll keep all the zero's you measured as long as the material is symmetrical o.c.
Regards...
Man muss mich nicht mögen, aber, man sollte mich respektieren!
Letzte Änderung: 08 Mär 2022 16:59 von Alter Stassfurter.