Frage
First Test with 600
- AlanUK
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
07 Jul 2016 16:26 #35583
von AlanUK
SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360
Dieser Beitrag enthält einen Bildanhang.
First Test with 600 wurde erstellt von AlanUK
Hi,
Have finally assembled my unit, no real problems, just the UC100 driver not auto installing, but loaded it manually, all as per the instructions and video from StoneyCNC, can not stress enough how much information StoneyCNC provided with the machine, a USB flash drive full of information, manuals, videos and the UCCNC software.
As per the instructions loaded and cut the Stepcraft logo, so now know it all works OK.
Will be adding work as I progress.
Alan
Have finally assembled my unit, no real problems, just the UC100 driver not auto installing, but loaded it manually, all as per the instructions and video from StoneyCNC, can not stress enough how much information StoneyCNC provided with the machine, a USB flash drive full of information, manuals, videos and the UCCNC software.
As per the instructions loaded and cut the Stepcraft logo, so now know it all works OK.
Will be adding work as I progress.
Alan
SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360
Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.