Frage Fusion 360 Post Processor Attached in Here

Many thanks for the WinPCNC Post Processor.
Will definitely test it during Christmas holidays.

Also many thanks from my side for Win-PCNC-Pp. Suppose that willmake the workflow using Fusion 360 more comfortable. Did download on the spot but will test it later.

wbr Michael

Does anyone know how to change from mm/min to mm/sec in the Fusion tool library?


Many thanks,
Marco

Maybe that´s the possibility for changing velocity you intended to know:

- menu Hilfe/help
- choose "Erste Schritte"/first steps
- in context-menu select in pt. (1) - "Einrichten" the unit you want to use

Thanks Michael,

I think this does not solve my problem, or I misunderstood your suggestion?
The mm is okay already, but the feed rates are in mm/minute.
From my Estlcam settings I am used to have mm/sec.

My question is if and how I can adjust the federate settings from mm/minute to mm/second in the tool library and as well how to adjust the post processor to use the mm/second instead of mm/minute values.

Many thanks,
Marco

Ah Ok - I completely misunderstood your question, I didn´t use the CAM-Module yet.

Sorry

Marco,

there is no specific setting into the tool library in Fusion.
Therefor you have to adjust your post processor.

Please look for the feedFormat at the beginning of the post processor and add your desired scaling as shown here:
var feedFormat = createFormat({decimals:(unit == MM ? 1 : 2), scale:1/60});

/Achim

Hi Achim,

many thanks for your support.