Well, the screw comes very close to the roller anyway: a forgotten detail with the transition from 3 to 4 rollers perhaps? I don't think this has to ...

When I hit the "Home" button, the unit is moving to the corner normally without issues. This is only happening when I push the "Goto Zero" button, wh...

I made several files during the process, a lot of changes afterwards etc. So I don't have a proper dxf file for it. And... it doesn't work as it i...

About the Loctite: never use the red one (262 or 271), but use the blue (242) instead if you want to be able to disassemble the machine or a part of i...

I use the RP2 for emulation also: even most of the Playstation One games are running great on it. As for the controls, the ControlBlock (or similar...

Triplex (birch) 12mm (and I'm using a 4MM MDF cover on top of it to avoid damages)

The claws are done:

Yes, it works fine for the nasty dust. It will not collect all the scobs, that must be done directly with the vacuum cleaner after the cuttings are d...

...but how to make the clamps if you don't have clamps to fix the material... 😛 With some bits and pieces...