Look forward to seeing that - hope it comes up to expectations. I'm sure it will!! Peter

Hi Doug, The spindle is already advertised on the StoneyCNC website, though it does look as thought the VF inverter box is still in the prototype s...

Hi Doug, So yours was showing the same symptoms - I'm very tempted to take a deep breath and purchase the same industrial spindle you have. It m...

Hi Garth, Address sent via a private message to your good self - click on "Private Messages" on this page header to access your mail. Peter.

Hi Pete, Having to hammer home the T slot aluminium baseplate does suggest that something severely amiss in the whole Y-axis assembly. It sounds as...

Miguel, I think the whole of the English speaking Stepcraft community owes a vote of thanks to the nameless one!!!! I feel for you having to was...

Hi Miguel How annoying that the Y-axis needs tuning again - its a real pain. When I tuned mine, I made sure that the moving rollers were all sla...

Hartmut, I think your idea is an excellent one - perhaps we need an independant "Wiki-step", whereby questions can be posted and relevant answers r...

Hi, IMHO it is unlikely that Stepcraft will make any real improvements to the product as long as this forum is acting as their customer service and...

Frank, Something is badly amiss if you had to resort to such drastic methods - sounds like a horror story, is it too wide? My T slot baseplate f...

Roy, I think the most important thing is not to have the machine twisted, I can't see how it can be properly set up if it's distorted. Frank, If ...

Hartmut, The board has worked reliably for a couple of years or so, and there is plenty of solder resist over the tracks, so I think a metal sliver...

Hi Garth, Glad you are up and running again, pity the replacement chip didn't solve the problem. If you are willing, just throw the old board in...