Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
3
Beiträge
2
Benutzer
0
Likes
4,248
Ansichten
Themenstarter
When using a 3mm drill, I usually set the passes at 1.5 or 1.7mm with MDF, so I take the half of the diameter of the milling drill.
But it seems the tool hasn't any issues with 3 or 4mm passes, so what's the rule I should apply?
I guess this rule change for different material such as hardwood, plastic or aluminium.
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Veröffentlicht : 16/10/2015 4:10 pm
Hi Denus,
I don't know if you can extract information from the list of parameters in the cnc-wiki, but there are values of 2mm diameter an 2 mm per pass at speeds of 10mm/sec listed: http://cnc-wiki.de/Betrieb/Fraesparameter
In my tests I did use at lead the diameter of the drill for each pass.
I guess this rule change for different material such as hardwood, plastic or aluminium.
That's for sure! It depends mostly on the hardness and if a material melts / burns.
Daniel
-----
Veröffentlicht : 16/10/2015 5:48 pm
Themenstarter
Thanks a lot!
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Veröffentlicht : 16/10/2015 7:42 pm
