- Beiträge: 21
- Dank erhalten: 4
Frage
Anyone built a 600 enclosure?
- K3CFPV
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
04 Nov 2017 22:53 #51059
von K3CFPV
S2/600, Industrial HF spindle (StoneyCNC)
DL445, 4th axis, touch probe, 3D probe
UC100 + UCCNC (Win10)
Anyone built a 600 enclosure? wurde erstellt von K3CFPV
I just started putting my enclosure together for my 600 and am already stuck at step 1.4 which directs you to screw the base plate to the lower profiles with M6x30 screws. However the upper slot on the profiles seems to be threaded M5 as I can get an M5 screw to start but not the M6 which they provided. Has anyone already put an enclosure together and not had a problem?
S2/600, Industrial HF spindle (StoneyCNC)
DL445, 4th axis, touch probe, 3D probe
UC100 + UCCNC (Win10)
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- K3CFPV
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 21
- Dank erhalten: 4
05 Nov 2017 15:50 #51064
von K3CFPV
S2/600, Industrial HF spindle (StoneyCNC)
DL445, 4th axis, touch probe, 3D probe
UC100 + UCCNC (Win10)
K3CFPV antwortete auf Anyone built a 600 enclosure?
Considered this closed. Fresh morning and I tried again, this time with more pressure on the screws (more than I was comfortable doing last night, and the screws were able to take hold. On with the assembly.
S2/600, Industrial HF spindle (StoneyCNC)
DL445, 4th axis, touch probe, 3D probe
UC100 + UCCNC (Win10)
Bitte Anmelden oder Registrieren um der Konversation beizutreten.